Honda Spree and Elite 50 Forums

d*** this is complicated polish it but not to much and where is the cheapest place to buy a new float valve

Im not sure what the needle bore is?

alright well i pulled vacuum on the line running to the petcock and fuel filled the container at a consistent rate, so my problem is the float valve.... I tore into again for the third time and it appears unclogged??? I don't get it

Well I'm in Springfield, IL central IL I have a clear fuel line and when i pull vacuum on the line fuel fills the clear tube but doesn't seem to enter the bowl at a constant rate just keeps filling the tube

Well it will only stay running for about 30 seconds

No I dont have an inline fuel filter just clear tubing, I forgot to mention i don't have the factory airbox and filter so im guessing that's the problem but i plan on just putting a 70 jet and breather filter will that work?

Update: well I got the fuel valve in today, bought a brand new one and replaced the plug at the same time, started right up idled for a bit then died and wouldnt start back up until I sprayed starter fluid in the carb fired right back up then idled and revved for a bit and died again, It wont stay ...

Ohh yea I did that to and after cranking it for a while the plug was wet and smelled like gas so Im assuming its that valve I hope

I am completely American and Caucasian thank you , but I cleaned out the carb and gas tank checked for vacuum leaks, used toothpaste to reseat, and still runs like s*** so I bought a new fuel shutoff valve mine drips gas when the motors off so I think its broke and beyond repair, any other ideas?

okay well I have the tank off and I dont see a "said" strainer? any pics? sorry this is my first scooer so clean the "carb" singular

So I just picked up a wrecked NQ50 for $40 bucks it runs only if you mess with the fuel shutoff valve that was placed inbetween the carb and fuel valve. It seems to run best when the fuel valve is opened for a second then closed. So my assumption is that its flooding itself. so what do I need to do ...