Honda Spree and Elite 50 Forums

Measure the hole in the rim. The valve stems go by hole size. 11.3 mm is standard for my 125 Elite and Helix
I would believe it to be the same on the 80cc. 11.3 mm is .05 inches so either .45 or .6 with a good rubber seal will work as long as it fits the hole.

Found Slime ones at Autozone so I ...

chevyguyjay wrote:go to murrays, or autozone. they sell valve stems there. i did that to an elite 80 i worked on a few months ago. its like $6 for a package of 4.

Do you remember what size you purchased?

Sweet, thanks guys!!

Ok guys, I have an '87 Elite 80 that came with tubed tires. The rims are stamped tubeless and can run them, so I purchased 3x10 tubeless tires. Now I just need to know what size tubeless valve stem to purchase that will fit. Any ideas? I called my local Kragen and they carry two sizes, .45 and .6 ...

Greetings:

Sorrry I presumed it was a 2-stroke 50. In that case just address the float valve issue and don't change anything else for now. If it's a 4-stroke 80, your limited low-speed mixture adjustment range should be enough to get it running once the carb's clean.

Yep, sure enough I found one ...

Greetings:

I've never seen the limiter you mention on any US Honda scooter, but I know what you mean. It's plastic. Vise-Grips always worked for me... Removal of the limiter is Highly Illegal, but necessary to permit realistic mixtures at idle. We'll send you a cake with a file baked in.

I would ...

Anybody know how to remove the limiter cap from the air/fuel mixture screw? I'm down to either a stuck float vent, or running too rich due to a/f screw. I've cleaned the carb 3 times, but never actually scrubbed the float vent. It runs great but leaks gas out the float drain tube and the air filter.

I have an Elite 80 that is having some issues starting. it's sat for 15 years, has a fresh battery, new plug, new air filter, verified vacuum petcock operation at the tank. I confirmed I have compression, spark, and if I squirt gas directly into the chamber behind the plug and start it, it will ...

Any ideas on the year?

First Pic

Found out it's an Elite 80. Don't have the year yet.

Hey guys, I just found an old Elite that I'll be getting for free to fix up and work on as a project. I haven't seen any pictures of it yet, but found out it's blue so far lol. I should have pics in the next few hours. I was wondering what are the major concerns on these to look out for when they ...