Search found 18 matches

by gulfstorm
Mon Mar 12, 2012 3:45 pm
Forum: General Discussion
Topic: Looking at 88 Elite this week
Replies: 6
Views: 1937

Re: Looking at 88 Elite this week

Awesome guys! Can't wait to check it out..... Will keep u posted. Any major issues with the elites that I should look for?
by gulfstorm
Mon Mar 12, 2012 1:18 pm
Forum: General Discussion
Topic: Looking at 88 Elite this week
Replies: 6
Views: 1937

Looking at 88 Elite this week

Hello all,

I am taking a look at a non-running elite this Friday which apparently turns over and that's about it. Any suggestions as to what I should pay attention to would be great?. I have fixed up two sprees thus far but never an elite 50 so we ll see. Hoping to get it for $100.

I'm guessing ...
by gulfstorm
Sun Mar 06, 2011 9:50 pm
Forum: Technical Help
Topic: Drive Belt clarification
Replies: 2
Views: 2023

Drive Belt clarification

Hello All,

After doing endless searches on the forum for a correct aftermarket drive belt for a spree I just want to ask if putting an ax 24 drive belt is going to be a good bet since it is 26 inches long and is a bit longer than the stock. I am not interested in the pulley mod at this time. Or do ...
by gulfstorm
Wed Jan 19, 2011 2:21 am
Forum: General Discussion
Topic: Spree Tires Help
Replies: 4
Views: 2601

Re: Spree Tires Help

Would most 2.75 size tires then fit? I heard there could be some interference with framework. Thx
by gulfstorm
Tue Jan 18, 2011 2:19 pm
Forum: General Discussion
Topic: Spree Tires Help
Replies: 4
Views: 2601

Spree Tires Help

Hi All,

I have been looking on the forum to get some info on the tire brand, sizes etc for my 85-86 sprees. I just wanted some suggestion as to what you chose for your tire and where you got it from. I am looking to buy online. I need a tire that fits without mods but would like to have some ...
by gulfstorm
Tue Dec 28, 2010 7:07 pm
Forum: Performance Technical
Topic: Contemplating some upgrades...
Replies: 15
Views: 5955

Re: Contemplating some upgrades...

Thanks a lot. Great to hear that they come with instructions. I ll look into gears as well. Does the stock carb work okay with the bigger bore?
by gulfstorm
Tue Dec 28, 2010 1:02 pm
Forum: Performance Technical
Topic: Contemplating some upgrades...
Replies: 15
Views: 5955

Contemplating some upgrades...

Hello All,

I have been on this forum for about a year now. Got two sprees, 85 and 86. Looking to do some upgrades on one of them. My 86 runs quite well but there is an air leak somewhere in my intake or carb system. My screw on the carb has to be in all the way for the thing to run without stalling ...
by gulfstorm
Fri Apr 23, 2010 2:53 pm
Forum: Technical Help
Topic: Heavy vibration under acceleration/deceleration
Replies: 3
Views: 2564

Re: Heavy vibration under acceleration/deceleration

So here is the update:

- exhaust and kickstand clear well and the stuttering/vibration definitely is coming from the drive train.
- Flywheel and the wheel behind it are all well. No signs of wear and tear.
- Belt well within wear limit and looks good
- I took off the clutch and the inner wheel is ...
by gulfstorm
Wed Apr 21, 2010 6:33 pm
Forum: Technical Help
Topic: Heavy vibration under acceleration/deceleration
Replies: 3
Views: 2564

Heavy vibration under acceleration/deceleration

Hi All!

So I couldn't get enough of my first spree that I got back in January so I had to pick up another one (this one in MUCH) better shape. Under 600 original miles, white, perfect body, even came with some honda saddlebags, basket and windshied. The problem I am having with it this heavy ...
by gulfstorm
Thu Mar 04, 2010 11:19 pm
Forum: Technical Help
Topic: Getting it to start: Part 2
Replies: 5
Views: 2334

Re: Getting it to start: Part 2

Thanks for advice,

I am going to look at the carb mount issue sometime this week. Good to know of the potential mishaps that could happen. As far as engine getting too much air, I had this issue before this last round of carb removal so I am not sure if it is the mount. I will look up the forums ...
by gulfstorm
Wed Mar 03, 2010 9:10 pm
Forum: Technical Help
Topic: Getting it to start: Part 2
Replies: 5
Views: 2334

Re: Getting it to start: Part 2

What a busy day. I did get the spree to start this morning, mainly by draining the carb with the drain screw. It start fine after that, but with a fully charged battery. I went for a little cruise only to find spree stalling after about 5 mins into the ride. It would start and idle fine, however as ...
by gulfstorm
Wed Mar 03, 2010 9:56 am
Forum: Technical Help
Topic: Getting it to start: Part 2
Replies: 5
Views: 2334

Re: Getting it to start: Part 2

Good and bad update!
Good news is that I finally got the spree to run following another carb clean. It started no problem with the electric start. A lot of hesitation though and revs going up then eventually stalling. After I ran it more and more, the stalling happened less and less. Finally took it ...
by gulfstorm
Thu Feb 25, 2010 9:06 pm
Forum: Technical Help
Topic: Getting it to start: Part 2
Replies: 5
Views: 2334

Getting it to start: Part 2

Hey there,

So following yet another carb clean I ALMOST got the spree to start. This time, it fires up ( I hear the engine running at very very very low rpm ) and then it dies...drained the battery trying to start it. Carb is full of fuel so i guess supply is not the issue. Spark plug was wet ...
by gulfstorm
Wed Feb 03, 2010 9:46 pm
Forum: Technical Help
Topic: At least the horn works!
Replies: 2
Views: 1313

At least the horn works!

Hey spree fans!

I posted a few weeks ago when I first got my spree and was amazed at the great condition that it was in. Since then I drained the oil and replaced, drained gas and replaced, took carb off and gave it a good clean, got a new battery, spark plug. Having done all of that in the last ...
by gulfstorm
Fri Jan 22, 2010 11:44 pm
Forum: General Discussion
Topic: Almost there!
Replies: 4
Views: 1504

Re: Almost there!

Thanks for the tips elite members! I completely forgot about the trans oil! Yeah carb cleaning is a must for sure. But 5 times....really? when i took mine off. it didnt look too bad inside. But we ll see. might do it again. I CANT WAIT TO START IT!!!! just a few weeks away now hopefully. Actually I ...