Honda Spree and Elite 50 Forums

I have a 2001 sa50 with 80cc bore and a set of 8.5 gears,with 25,500 miles.Been having a gear rattle when acceleration, sounds like they are rattling on the side of the case.I opened case and didn't find anything that looked bad.I am thinking it mite be the side cover. :*:

This is the sliders on the ramp plate not the rollers that wear out fast.

Try pushing in with you thumbs on the tire if its feels bit soft put more air in.I stopped using a tire gauge.You should just be able to push in a little.lets a lot of air out trying to check on the straight valve stem.

I am running a 80cc bore kit in my elite, my sliders in my variator wear out and eat my variator up in about 2 months if that, i tried different variators and different sliders.This is the sliders on the ramp plate not the rollers that wear out fast.I tryed a dry film lube on it seems to help a ...

Why do that, just drill out your fuel petcock out.I don't trust it working right.I use a plastic in line shut off for a lawnmower.

I am running 90/90 x 10" tires with metro back wheel, had to bend kick stand out a little from tire. Stock front wheel tubeless,had to drill out valve stem hole a little and use a chrome bolt together valve.This size tire are the biggest your gonna fit.Michelin S1 are the best i tried at a good ...

Look at the pulley face, if you can see a wear line about 3/4 high on the pulley,then that cover is stopping the belt from going all the way up.