Honda Spree and Elite 50 Forums

Here is a picture of the actual cable from my Dio. It was a JDM 1989 Dio SP.
Maybe bear can confirm it will work for the AF16. Im pretty sure it should be the same as the engines are identical.

measure the belt and ask the experts if you need a new one. i think it was on the worn side and a new one should give you the extra mph.
im glad you are having fun with it. good luck

Thanks a lot Mr Bear

I ordered at my local dealer using the same part numbers i found in the SS Honda site.

Please help... im looking at the schematics to order a bearing or two but im kind of confused y the perspective of the graphics.
The drive shaft in my DIO AF18 engine got a little play so i want to install new bearings in it. It is the shaft that has the clutch and bell so to be clear.
I believe its ...

mine did not go flush. i tried hammering it to make sure it was all the way in but that's how far it will go.

I got the green Pollini ones sold as 2k by the shops. Once they "break in" i feel like i should have gotten something a little bit stiffer but i still like them.
I say, stay with those black ones.. you will not notice much difference if you get the green.

WAIT...
mousewheels.. is that a pic of a connector for a SYM or an Elite?

Thanks for the input...
stupid me, i was not thinking to check where the cables go for the SYM and was going to check the Elite manual instead. May be the cables go to different pins.
Thank you very much.

I believe a ZX 18mm belt would not come down to even touch the boss if i install the drive face, there is just not enough space.
I will try with the stock 15.5mm then.
Which one do you guys recommend? are there different brands or is it just the Bando belt...what is the part number?
Thanks a lot.

Ok i got a supposedly unrestricted CDI from a sym dd50 to replace my restricted JDM unit which is the one on the left side of the picture.
I do not have the plug for the new cdi, i will get one but i want to make sure the pin location match the wire colors, so would you please either tell me which ...

Been away working and no time for the scooter.

I talked to Steve some time ago. He said my shaft is shorter because i have an earlier AF18 model.
This is how the boss stands in there, there are no shims or anything

http://img413.imageshack.us/img413/9524/bossy.jpg

Measurements:
boss: 35mm
old ...

Next time you can put it in the bonfire to burn the carbon instead of spending in a new muffler.

Whats wrong with these: http://www.northerntool.com/shop/tools/product_200330209_200330209 ? just the looks of it?

I asked about the speed ratings on these forums some time ago and one of the guys said:

Don't know. I took the stock oem tire that comes on the 94-01 elite s well over 80mph on the ...

24oko 48-122 now. Did not have the time to check for the jetting yet.
I think 32:1 is too much. Way too much smoke . Should be good for a racing setup but i am using the scooter for street riding.
Plus 50:1 is what the guys at VT recommended... Remember that Castor oil is very high performance. I ...

I'm doing 50:1 now with Castor oil.