Honda Spree and Elite 50 Forums

I figured it out. I took the cable off again, pulled on one end slightly, and the whole thing came out of the conduit. So, its gonna be a new cable for me.

Just changed the tires on my 86 elite 150 and the speedometer and odometer are now not working. This is very odd. The gear turns and the cable is properly connected. I've changed the brakes a couple of times before, so I've removed the tire several times and put it back on without any problems. Any ...

Sorry for the bad Iverson reference. But what do you all do when you need a gasket that is no longer available? I need the head gasket and cylinder cover gasket for my 86 Elite. Just wondering what to do...

Its not a constant click, and the bike dosent have to even be on for the noise. I will check the things you mentioned...thanks

Ok, so my rear end noises have returned. Earlier this year I had heard a "flap" noise coming from the rear tire area. Turns out the hub was loose on the wheel. Got that fixed. Now, a couple of months later, I am hearing a loud "click" while moving. Only when there is weight on the bike too. On the ...

I was wondering how much of a difference that putting a 28mm carb in the elite would make. Also, what else do I need to swap out for the carb swap?

I also read that the elite 250 motor wasn't a huge deal to swap onto the 150. Any suggestions? I am not very advanced but I do know how to work around ...

No visible marks that I can see. The sound seems to be coming from inside the wheel.

On my 86 Elite 150 I am hearing a flapping noise when the rear tire is moving. I thought it was belt flap, so I changed the belt and still the noise persists. Could this be a bearing out that I am hearing? Even when bike is off and on center stand, if I move the wheel myself, I hear the flap. Any ...

Ok, so my headlight will not turn on. I changed the fuse, replaced the headlight, and still no light. Any suggestions?

Yes, the clutch bell moves the wheel. And when I turned the scooter on yesterday and gave gas, the wheel turned... i am confused because just 2 days ago it would not move.

It seems that the drive face is fine. The noise seems to be coming from the clutch.

OK, so I have encountered another problem. My Elite 150 will start, but when I give it gas, it will not move. I am hearing something move down there but the wheels will not move. The belt is still in tact. I have taken the cover off and am looing at the pulleys. I just am not sure what else to check ...

Not sure if you read my post correctly. The use of the word "how" indicates that I know an adjustment is possible but am unsure of the exact procedure on completing the task. Now, I know that being an * comes naturally to you, but next time, try to read a post completely before losing it.

Thanks ...

Hey, my front brake handle is very loose and has a lot of play. How can I adjust this?

Thanks

PS what I am trying to reconnect is the carb. I took it off to check the float and it was fine so when I put it back on, i have crossed a line somewhere.