Honda Spree and Elite 50 Forums

Just an update. I put a new belt in it and now I am up to 28ish mph. I guess I am going to have to start looking closer at the carb.

Here is the info I could find on the carb. Looks like it is just the company name and then down by the zip tie is the manufacture date of April of 2010 so it is a new carb. I couldn't find any other markings on it.Take a look at the pic and see if it tells you anything.

Other than the fact that it ...

Look om the flange of the carb and there should be so letters and maybe numbers. Then again they can be on the carb body. Some like PA 54 or whatever. Then we can get an idea of what it is.

Ok, I will look when I get off of work and post my findings.

Change the clutch belt with a brandy new one ...

The problem I see is the non-stock carb. Is it as big as the stock carb was? Smaller, what jetting does it have? Why was it changed? The Spree is tuned from the inlet opening in the air box to the outlet at the end of the exhaust pipe and screwing with it can really degrade performance unless you ...

First off that is not the stock carb, so someone has fiddled with this scooter before. The drilled muffler also points to this.

Sorry, I forgot to mention that the carb is not stock.
To fine out why this scooter does only 25 mph you need to start with the basics.

Compression test first.

I ...

Hello,

First time poster.

I bought my first scooter tonight. It is a 86 Spree Iowa edition. I have been reading on here about the restrictors but I am having a time finding one on this bike. I pulled the exhaust and there wasn't a washer in there to drill out. I pulled the carb but I really don't ...