Honda Spree and Elite 50 Forums

I think you got a japan honda eve. that why does have a kill button switch.

if you can find a dio 2 motor ( af18e), it is good power / weigh ratio.

the motor mount can be use from honda tact af16.

are all dio variants have the same motor cc?


yes,
af18,af25,af24,af27,af28.


nice! i ...

veedubh20 wrote:I think you got a japan honda eve. that why does have a kill button switch.

if you can find a dio 2 motor ( af18e), it is good power / weigh ratio.

the motor mount can be use from honda tact af16.

are all dio variants have the same motor cc?

OK first, stop the sir stuff. I'm Fred or Bear. The oil pump is on the front of the engine below the exhaust pipe where it connects to the exhaust flange. Look on E-bay for an oil tank. It mounts under the seat next to the battery.

Here is the service manual, download they and it will handle the ...

with regards to the carb... the first thing you have to do is to run the engine...and hear the sound of the engine, if it is too loud then turn the idle screw counter clock wise until you get the ideal idle sound of the engine, and also check the rear wheel if it is running once the engine is turn ...

sir how can i enable the oil pump? im tired of mixing my oil and fuel, is there any solution for this? thank you[/quote]

First is there an oil pump on the engine? Do you have an oil tank? Then you need to plumb the oil tank to the pump and the pump to the carb and bleed the system per the manual ...

The air screw is the one nearest the carb/intake flange that goes in at an angle. The other is the idle speed. You need to plug the curved horizontal nipple right above the screws as it is letting extra air into your engine and may well be part of your starting problem. The vertical nipple is the ...

The air screw is the one nearest the carb/intake flange that goes in at an angle. The other is the idle speed. You need to plug the curved horizontal nipple right above the screws as it is letting extra air into your engine and may well be part of your starting problem. The vertical nipple is the ...

thanks sir. what do you mean by variated engine? i got this rig from my cousin doing drag racing here in the philippines, i got this non-working, i just replaced the carb. by the way how can i adjust the a/f mixture? because im having problem once the air filter is fitted to the carb.. the engine ...

i still dont have push button start... how can i get this working? do i need a bendix drive?

thanks sir. what do you mean by variated engine? i got this rig from my cousin doing drag racing here in the philippines, i got this non-working, i just replaced the carb. by the way how can i adjust the a/f mixture? because im having problem once the air filter is fitted to the carb.. the ...

I like the cut down look but what are you doing for tail lights? I figure you have to have at least a brake light to keep the cops semi-happy.
http://www.chrisd.ca/blog/wp-content/uploads/2009/07/bicycle-hand-signals.jpg
Check your local laws :smile:

nice info sir! hehe! here in the ...

PolarIce wrote:I like the cut down look but what are you doing for tail lights? I figure you have to have at least a brake light to keep the cops semi-happy.

i used red CCFL as my park light, i dont have brake light sir. i will upload the updated pictures later having park light and head light as well.

That is a spree
with an afo5e variated engine and custom air filter
handlebars from a bicycle
Aftermarket Exhaust from a dio chopped and welded to a afo5e head pipe
Recovered seat from a razz?
Brembo hand grips and a custom side stand.

Very nice mash up :2thumbs:


thanks sir. what do you mean ...

burnt_toast wrote:a very nicely done spree cutdown, very very nice

thanks sir!, can i call this... a "mixed spree" ? hehe

The body work looks like a Spree, but the exhaust isn't from a Spree. Is the intake manifold 2 or 4 bolt onto the crankcase and the kick starter is backwards for a Spree. I suspect a Spree with a transplanted motor. What are the numbers on the transmission cover?

intake manifold has 2 bolts, then ...