Honda Spree and Elite 50 Forums

Well actually * if can read! The rest of the 50cc Honda line which GEt is a 4t

Lol thanks and didn't even know this was here Lmk if need anything else

You can use HOK and have it look like $2 discount spray paint. Everything is in the prep!!!! Automotive paint will look better and last alot longer! Uv additives gas resistant and harder! Now if want auto paint but don't have the equipment. Check out Alsa killer cans or if go to home depot for ge ...

I actually have a spare motor 139qmb today actually swapped the clutch. the clutch fits the elite fine just have to use the elite nut. the variator I switched out awhile ago. the back part with the rollers in it only. my elite one was ate away. kepted my boss and the front part of variator. cover ...

you sure yours is totally derestricted? have 2 buddy's with them both of there's are derestricted and I murder them!! LOL say this all the time because I had a 139qmb for like a month! if it would of been my first scoot (first was a jog) I never would of wanted another one there flipping slow as f!

could get some PVC pipe and an end cap. whatever size pipe to fit your cup. and length, put end cap on pipe and use a self tapping screw and screw into floor board or another location just make sure no wires are underneath.
just a thought.

x2 just wear goggles and do it outside its some nasty crap. even useing it outside still get headaches from it!

got it to work LOL. not Briggs brand don't remember what but think was for 12-15hp motors basically took off silencer cut the end off pulled the pipe out. cut pipe 3/4 off. took the new muffler and put it into the pipe and crimped it in. put some rtv around the mower muffler and slid it back into ...

LOL went to one Honda place with the retard earlier. they said they could order it. be about 2 weeks drove another 30mins to another place which they had it and put it up front for me. they actually have workers with a clue. LOL part number prolly helped also. God what a freaking mess inside trans ...

ty that's what I need off to the Honda dealer hope don't talk to the * again!!

no not that one the other one behind clutch. holds the gear oil and stuff.

ill post here also dry not trying to * but do you know what part number gasket is?

well trying to get a freaking gasket at local Honda place. well guy I talked to on the phone says there is no gears in scoot blahhhhh. anyways I need a part number for a 2000 Honda elite s gasket the one for the gears. The one that take clutch off remove other screws tap the small cover off and then ...

I have an expansion exhaust works great problem is to loud for me especially at the frequency. Was wondering if ad a Briggs muffler at the end of the silencer would hurt performance at all? Or vest way to cut open silencer to repack? And don't wanna drive an hr to get welded back up. Buddy has a tig

If have acess to a welder and know how to weld!!!(don't risk it on popcorn s***) or know someone who can scoots are pretty easy to fab mounts and stuff. If have worked on cars and trucks with custom mods(not bolt ons) then it's cake. Maybe 5-10 10/10 being body dropping trad or sf