Honda Spree and Elite 50 Forums

havent spent a lot of time on her in the last few months. Figured i should get to it as spring is hear.
Got the fame all cleaned up an painted

http://lh5.ggpht.com/-4BPQhWuuWgE/UUtQMjOHCUI/AAAAAAAAACc/ggoYYUSxLD4/s1600/IMG_20130314_230134_855.jpg

Big bore in, pipe on, she looks low but thats as ...

It's below the front bushings on the 85. In 86/87 they changed it to a slip in to the frame design. If the way it's set up (stock 85 mount) I will change to the 87 mount I have. Every thing I have done was to preserve the stock setup even the angle of the shock is the same as stock. Just pushed to ...

Paul is correct the stock mount is in tacked. (intact) I just moved the hanger mount back. It may vibrate more because of the big bore.

Current plans include
Malossi Big bore
Leo v pipe
Custome side stand
Shorter stiffer front springs
Air ride rear. You can see the air piston in the pic from the ...

This has been my daily driver for the last year and a half i picked her up with about 2200 miles on and now i'm at 12,000 miles. I have done the normal mods to her. Ruckus variator, up jetted, Met wheels, Elite front brake, 90/90 tires,87 kick starter gear, and a bit of rattle canning, and on my ...

I wish i could do a full restore on my bike. Your work is DETAILED. so f***ing amazing. cant wait to see it finished.

thanks guys the search continues.

Anyone Know if a gy6 wheel will fit on a ch150? Or any other wheel for that mater. the ch150 must have the ugliest wheels ever put on a scoot.

the speeds recorded are from GPS

I dont see why you would do a BB and not the pipe and intake/carb.
as you say it will not reach higher rpms without the added parts.
so a BB will just get you to 35mph faster. thats not his goal.

with just a few cheep mods i was able to hit 45 mph all day long.
1) ruckus variator: best thing you can do to a stock Aero, got me to 45 with just this mod.
2) upjet the main to an #85: this will richen up the air to fuel ratio and help mantain 47.
i then did met wheels so i could add some width to ...

its looking awesome.

I did a few cheap mods that made a big difrance.
ruckus variator and upjet to a #85
added 10mph at about $35

thanks MrWest. nothing like flat black on an Aero.
cant wait to see yours finished.
any mods planed ?

I did some rounds down low. I like the black and red on yours.

it only hase one bolt (through the shroud). the plate just pushes on the pump to hold it in place.

there is a bolt that goes through that plate then through the shroud that covers the top end.

Found an air leak. runs great now. thanks for all the help guys