Honda Spree and Elite 50 Forums

Thanks everyone for the help I know what to get now.

Unless it is part 14 http://www.cmsnl.com/honda-nu50-urban-e ... ml#results

One option is Honda - look thru your favorite on-line Honda Dealer parts fiche and with a little patience, you can find most, if not all of those bolts (on average, about $0.60 each). If you have a good local dealer, they can usually get them overnight if not in stock.

I believe it will also tell ...

I have a Honda Urban Express Moped and I finally got it running but it needs a few bolts to keep the exhaust and airbox on. The photos show which bolts I need. If anyone knows the sizes of these bolts please post or if you are selling these bolts please post.
http://24.media.tumblr.com ...

So currently the I modified the brake cable and now its working for the rear brake. The engine case has all of the bolts it needs.
So now I just have a last few things to do:
1. Fix electric starter motor problem
2. Put Horn onto the frame of the scooter
3. Put body panels back on and turn signals

http://www.hondabike.com/fiche_section_detail.asp?section=2042507&category=Scooters&make=HONDA&year=1986&fveh=123463

Thanks for that bit of info that will help alot!
Also any ideas on
1.Electric starter? I did what you told me to and the oil light turns off.(Its like the whole scooter shorts out ...

http://www.hondabike.com/fiche_section_detail.asp?section=2042507&category=Scooters&make=HONDA&year=1986&fveh=123463

Thanks for that bit of info that will help alot!
Also any ideas on
1.Electric starter? I did what you told me to and the oil light turns off.(Its like the whole scooter shorts out ...

The electric starter is still not working.
but I also have these issues.
Need to know the sizes for these two engine case bolts.
http://24.media.tumblr.com/tumblr_m6phlaG0ii1r1wboho1_500.png
Also how is the rear brake cable set up I have to much slack. Just check out the video in the link.
http ...

You tested nothing, the plug has to be on the relay and you ground the wire thru the back of the plug

Ok I did it correctly this time and the only thing that happens is that the oil led bulb turns off when its the starter relay green/yellow wire plug is grounded while the brake light is on.

Also I got around painted the wheels flat black and clear coated them.

Go to the starter relay and find the green/yellow wire and ground it while the brake light is on. What happens?


So I took the starter relay out and plugged a wire in where the green/yellow wire would go. Then I grounded that wire. Then I tried starting scooter with electric start while brake light ...

Brake has to be on with brake light illuminated before the starter will turn over.


This is not the problem.

OK,then when you press the start button, does the start relay click?

The scooter is completely silent and the stater relay makes no clicking noises.
I am guessing the starter relay is ...

Brake has to be on with brake light illuminated before the starter will turn over.


This is not the problem.

NO STARTING FLUID (ETHER) with 2 stroke. I washes the lubricating oil off the cylinder walls allowing metal to metal contact. It can do other bad things too but just throw it in the trash. If you are going to prime an engine, use a 32 to 1 gas and oil mix.

If the motor fires with prime, then you ...

Ok I tried getting it running today. The engine gets spark I tested that out. Then I tried to get it to run by kick starting it and I could only get it running by squirting in some ether and kick starting it. This resulted in running only for a like 1 to 2 second burst. Any advice on what I should ...