Honda Spree and Elite 50 Forums

Aloha,

I been wondering on whats the concept on tuning a carb. I got a 28 oko by the way

Like how do i know if the pilot and main jets are too big or to small?


Mahalos for your time

I need a refrence on how i should port my virgin block. I want to port my boost to match my 72 contessa and my intake.

Will that be a bolt up wid a arnada headset?

alooha, i just baught a spree and want to do a disk front end conversion. is it possible to use a SYM DD50 disk front?

thanks alot bakaracer. pipe runs pretty good. bike feels pretty rappy

i was thinkin of gettin a 72-90cc scorpion pipe
i was gonna put it on a 120cc. will that work?

as i was building my 120 stroker. i was porting my intake and i thaught to my self, will it be better if i cut out the line in between the intake and make it bigger.
so instead of having 2 squares in the intake. will it be better to cut the thing in the middle of the intake so it makes the intake ...

ok.so my bike is a 120cc stroker. wat is a good carb for it

what is a good carb for a 120 stroker

Kuz my frend is the guy who built the motor.and he said its a 107cc

How do u add a stroker bore and crank to get your overall cc.
For example. A 50mm fully counter stroker crank.and a 54mm ruima bore. Wat will it turn out too

Not to sure wat size.but my bore and crank(50mm fully counter) equals to a 107cc.
1st gen pg long
30 oko(142 main, 58 pilot)

Wat is plug chop?
and I will try to adjust the clip. Kuz I have a little sputter from idle to 3/4.but to full its good

how do u know if ur main and pilot jet are to big or small?

I want more speed out of my 107cc stroker motor
Af18 block
50mm fully counter crank
And idk wat size of a bore.but its charmo
All ported and matched
7:1 gears
30 oko( 145,58)
Ct chrome
Ncy drive line
Daytona ramp
Polini guides
Zx trans. Ncy torque plate
42.9 weights( 8g, 6.3g weights)
1500 center ...