Search found 7 matches
- Mon Jun 18, 2012 7:15 pm
- Forum: Technical Help
- Topic: Blew out a screw! help please
- Replies: 13
- Views: 6703
Re: Blew out a screw! help please
Looks to be the drain screw but on occasion Honda does weird things and i haven't owned my spree long. Pull up a parts diagram it should tell you the. Name thread size and length. I would do it for you but I'm on my droid
- Mon Jun 18, 2012 3:39 pm
- Forum: Technical Help
- Topic: dies at WOT... thoughts needed
- Replies: 14
- Views: 4845
Re: dies at WOT... thoughts needed
going by that i really need redline all sport, designed for air cooled. premix or injected
wasn't able to get more plugs but i ran it up and down the street, no problems. 27mph now
and yes i have to wait until i get my tires to compression test it and start DDing the NQ instead of my 240sx ...
wasn't able to get more plugs but i ran it up and down the street, no problems. 27mph now
and yes i have to wait until i get my tires to compression test it and start DDing the NQ instead of my 240sx ...
- Mon Jun 18, 2012 1:04 pm
- Forum: Technical Help
- Topic: dies at WOT... thoughts needed
- Replies: 14
- Views: 4845
Re: dies at WOT... thoughts needed
High performance? Stock It's low revving low compression air cooled engine ported for fuel economy that tops out at 30... the gunk on the carb and lack of an airfilter tells me the PO had no clue what he was doing... my lunch is 2 hours I will let you know how the test ride goes... IMO pj1 and ...
- Mon Jun 18, 2012 2:14 am
- Forum: Technical Help
- Topic: dies at WOT... thoughts needed
- Replies: 14
- Views: 4845
Re: dies at WOT... thoughts needed
hmm i just looked up my favorite oil and saw this This Red Line two-cycle racing oil provides improved power and perfect cleanliness. Power improvements of 3 to 5 percent have been obtained in dyno tests. Its high-temperature stability prevents deposits in even the hottest upper ring and piston ...
- Mon Jun 18, 2012 12:55 am
- Forum: Technical Help
- Topic: dies at WOT... thoughts needed
- Replies: 14
- Views: 4845
Re: dies at WOT... thoughts needed
what's the difference between oils sold as "injector oil" and as ones sold as "premix"? viscosity seems the same and lubrication difference is minimal if any. so to me no mater what it goes in it's called premix oil even if it goes in an oil injected bike like the spree or a ke100.
all forms of 2 ...
all forms of 2 ...
- Mon Jun 18, 2012 12:08 am
- Forum: Technical Help
- Topic: dies at WOT... thoughts needed
- Replies: 14
- Views: 4845
Re: dies at WOT... thoughts needed
possible
wow, i pulled the plastic/fairing off, the carb is covered in gunk... open up the airbox and see no filter... i took an old torn filter from my 144 and put it in there going to take it for a spin and get a new plug on my lunch break tomorrow
i pulled the plug and it's red? which according ...
wow, i pulled the plastic/fairing off, the carb is covered in gunk... open up the airbox and see no filter... i took an old torn filter from my 144 and put it in there going to take it for a spin and get a new plug on my lunch break tomorrow
i pulled the plug and it's red? which according ...
- Sun Jun 17, 2012 5:40 pm
- Forum: Technical Help
- Topic: dies at WOT... thoughts needed
- Replies: 14
- Views: 4845
dies at WOT... thoughts needed
if i go WOT for a mile or more my spree will die and i can't start it unless it sits for a few minutes and the first time it backfired(or the opposite)... i have 2 thoughts that it could be...
1. a clog somewhere in the fuel supply that doesn't allow enough fuel through to go WOT and it runs the ...
1. a clog somewhere in the fuel supply that doesn't allow enough fuel through to go WOT and it runs the ...