Honda Spree and Elite 50 Forums

I have 2 sprees, '84 & '85. After they sit in my studio for the winter, their brakes get really sticky and my '84 brakes have basically seized. After playing with my '85 brakes, I managed to get them less sticky, but still not great.

Despite my small collection, I haven't had to do brake work on ...

That is the advice I was looking for. Thanks!

Hello,

I'm reassembling my Spree after it was brutally kidnapped and torn to shreds.
I bought a used starter motor that seems to be in pretty good shape.
Still, it is used. I'm wondering if there's a way to service my used starter motor to promote longevity (i.e. instructions to take it apart and ...

I bought the scooter about 3 months ago, so its possible I just didn't realize I was suppose to shut off this valve every time I got off the bike. However, it's a daily driver (I live in the city--it's ideal transportation) and it's never shown these symptoms until now.

In the picture attached ...

This is good information; thanks.

Would this confirm the faulty vacuum petcock idea?:

Before removing the carburetor, I turned off the fuel line with the little on/off valve. I'm still new to two strokes, so I wanted to see what would happen if i turned it back on without the carb attached (i.e ...

For the past few days, I've noticed my '84 spree having harder startups and smellier exhaust. Yesterday I drove my Spree 12 miles to work like I always do. After the ride, I parked it and let it sit for about 4 hours. When I came back to it, I smelled gas. Upon further inspection I saw gas seeping ...

I have some input.

I have cleaned my carburetor thoroughly with the help of a tech, chemically cleaned my muffler, replaced my air filter, replaced my sparkplug, adjusted my carburetor screws, replaced a few bolts, fixed a vacuum leak (the black tube between my airbox and carb was loose), inspected ...

I've chemically cleaned my exhaust over the course of the last couple days.
I rinsed it out really good with the hose; lots of nastiness came out.

I've let it drain, and then shook it violently.
Still, there's water inside. I can hear it swooshing a little bit.
I got out my torch and got it warm ...

I downloaded the service manual weeks ago, which I always check before I post. I also always search wiki before I post. However, I learn much quicker if I just post a question and get a more personable answer.

I'd also like to remind everyone that these forums are not just for experienced Spree ...

My Spree hits 30, sometimes 31 or 32 on a completely flat surface--and it's all stock.
The problem is acceleration bogs down after warming up.
I understand a dirty carburetor would cause this, but I'm telling you I've thoroughly cleaned it. There's no more carbon deposits to be had. Still, I'll ...

Right this minute there's about 3372 miles.
Is the part number you gave me for the shoes? I haven't looked for them yet...

A Followup:

I did exactly as I wrote above, and my Spree is running well! Thanks to all those who replied!

I'm a lot like you--learning as I go, one Spree fix at a time, and relatively mechanically inexperienced, but I've just been through what you're doing.

I hate to be pessimistic but I don't think you'll be able to increase your acceleration, and if you do, I'd like to know the remedy.

My 84 Spree ...

I don't know much about Spree buying/selling, but I am an antique dealer and I can offer you this:

An item's true worth is constructed out of two factors:
1. What you're willing to let it go for.
2. What someone is willing to pay for it.

Also, you must separate your sentimental value in order to ...

Haha! Perfect! =D