Honda Spree and Elite 50 Forums

i installed polini bore kit on elite and wondering if u have to use exhaust gasket that kit came with? it runs fine so far without it

after several mods: 9to1 gears, polini pulley, stiffer clutch springs and center spring,85 main jet and derestricted exhaust with tunning my top end is 42 to 50 depending on conditions. i've purchased polini contessa kit and 88 jet and wondering if anybody out there ran this kit with stock carb with ...

i aplogize cb i guess that would help lol ita 2000 elite sa 50 with af 16 engine and thanks so i can eliminate that issue. i also installed 9 to 1 gears new polini 2 shoe clutch and 26mm exhaust my top end has increased but low end is horable but midrange has gotten better with heavier roller ...

i recently instaled polini pulley but could not use the round pulley boss do to its length it is longer than the stock one and believe im not getting the advantages of the upgrade so im using stock one right now and going threw alot transmission tuning with other upgrades would like to be able to ...

also have a question about pulley boss it is longer than stock one and could not get it to work so i had to use stock one mechanic also had this problem

well im glad i got my hands dirty and seen how every thing works i installed the 6.9 's and knocked out hole in air box i do bog a little unless i open it up at take off and low end still sucks but midrange ia alot better and can cruise at 35 all day an top out at about 43 mph which i couldnt do ...

thanks bonevs ok that helps cause im about to tear into now and gonna mess around with the rollers and leave tourque spring alone he installed the lightest rollers the polinni pulley came with which is 5.3 i have 6.9 which im gonna install and see if that makes a turn in the right direction

ok im gettin confused i went by wikispreedia upgrade path, and bits and pieces on here and by part suppliers as far as the exhaust its not a high performance racing one its rated stock to 72cc and comparable to a honda dio or derestricted factory exhaust i definetly need a trans tune but dont know ...

ok fellas will try thanks also wondering if he could have put restrictive plate back on pulley not sure if that is even possible

I do have a 2000 center spring and mechanic told me i do not have to jet i will knock out tabs in air box. i have to floor it to take off and stay on it till about 30ish and is slow while doing that seems like the power is there just not tuned right and using more gas wondering if rollers are to ...

I recently purchased 2000 elite sa 50 sr in mint conditon ran excellent but toped out at 38 mph. was looking to get 50 55 mph and seems easy to get to with some modifcations. so after some reaserch i purchased polini pulley , polini clutch , 9 to 1 asn gears 1000 rpm tourqe spring , new belt , and ...

what are center spings 1.5 to 2 k

thanks cb900f i have a 2000 elite sa 50 sr with af 16 e engine i use this scooter everyday and luv it. want to do some upgrades been looking at daywot and jiangwayne i really dont want to do a bbk or crank and bearing up grade. but need more speed if i change exahust , jet flow, varriator pulley ...

i recentley bought a 2000 honda elite 50 sa it goes about 37mph i would like to see 50 mph with stock engine if posable how would i go about this