Honda Spree and Elite 50 Forums

haha this set up blew up.. blew a hole throught the piston.. now i have 54mm waterkooled

hey guys i went down on the jet 150.. now something is sliding when i dump the throttle belt or clutch i have kelly heavy clutch installed, definitely feel more power..

what im working with just incase u guys wonder..before and after.. pic
kandy purple..

went down on the rollers with 6.3 gearing

hit 88mph
going to try smaller jet this weekend

i think my tiny tach is no good..going to order new one..

OMG my gps was set at kts not MPH..dumb

85mph was with 6.3 gearing
78mph with 6.8

maybe that pg pipe aint so good on a full stroker ?
maybe jetting or porting ? whats your temps at?

30mm oko
152 main clip all the was up..
48 pilot
temp is at 250-280 WOT about quarter mile..
around town temp it at 170-190

ported opened intake and matched boost port..

ct intake sweats a lot ...

Yeah I don't know what holding it that low.. Maybes reed valve

installed 6.3-1 gearing and only hit 75mph with gps..

ive hit 75mph on 7.5:1 gears. you need to rev higher.

What rpm's are you seeing?

hey i did a test run today with my tach at wot the rpm it climbs up to 6,500 but drops back down and stayed 5,500rpm.. my fastest speed gps at 68mph..Tried ...

installed 6.3-1 gearing and only hit 75mph with gps..

ive hit 75mph on 7.5:1 gears. you need to rev higher.

What rpm's are you seeing?
Hi.. my tach wasn't installed at that time I will install and find out today.. To get higher rev go down on the weights right? I had 3 8g and 3 9grams..i marked ...

installed 6.3-1 gearing and only hit 75mph with gps..

Trafficjamz wrote:

JAC3 wrote:Bump anyone ?..

I have some 6.3:1 gears that would be perfect for your goal.

Any gears over 7.5:1 will be to short to go 90mph


Is that the big PG for strokers?

so anything under 7.5 is good to go 90mph?.. i dont wanna lose any lower mid power.its a tida bore square once..

Bump anyone ?..

What tires are you running going that speed. Too long on a wrong rates tire can be trouble. Get a pic of that bad boy doing 90 on the speedo. I'm planning on running 6.8s on my w/c 121cc. I run Pirelli diablos on my 91 mph Zx. But those are 12" wheels and I need a killer set of 10s for the elite ...

52.6
54mm
2000 grab
2000 torque
pg long
30mm carb

goal 90mph plus highway

just cant decide what gear to run i have
8.4-1
8.0-1
6.8-1
6.5-1
5.5-1
zx trans 54grams

was running 6.5-1 but it feels like something is holding it back motor wants to go more..i think belt slippage.
havent clock with gps ...