Honda Spree and Elite 50 Forums

need to do a compression test on my ch80. what the threading in inches on the spark plug etc so I can get the right adapter for my compression gauge please ? I don't want to screw up the spark plug hole using the wrong a daptor. thanks

you can buy a kit to make your own cables for bike for around 30 bucks. Make about 10 to 20 cables depending on what you use. google making your own throttle cables etc. About the only thing you need after that is sliver solder and a heat source to melt it . youtube has a few videos that teach you ...

Can someone please give me a link for a clone bystater that will work ? Rather not pay 50 plus bucks for a new honda one .

Will the clone bystarters you see on fleabay for elite 50 , n spree work with ch80 ? thanks fleabay link. I don't want to spend 50 bucks plus for a new one.
http://www.ebay.com/itm/CARBURETOR-BYSTARTER-HONDA-AERO-NB50-ELITE-SA50-SE50-SPREE-NQ50-CARB-AUTO-CHOKE-/121163684656?pt=Motorcycles_Parts ...

honda R123 1422 Luminous Red paint . any spary can alternate ? Rather not buy custom spary cans. It was used on the 86 honda ch80 elite .

I think it just might be the starter switch itself. Pushed on it lightly and it works. Really doesn't matter I ll clean it and then pick up a used relay as a back up for now. May just be that dampness as got into the switch .

I see on ebay that there are after market starter relay . According to this ebay posting http://www.ebay.com/itm/HONDA-GL1500-GL1500A-GOLD-WING-NH125-CH80-GOLD-STARTER-RELAY-/200964570326?pt=Motorcycles_Parts_Accessories&hash=item2eca6bfcd6&vxp=mtr
The same relay on the ch80 is used also on the GL ...

elite 80 where is the cut brake switch located? .

How many horses the ch80 have? 10 ? 8 ? Need to know to decide if a 8 to 10 horsepower lawnmower muffler will work as a replacement. My muffler snapped off and the even with it repaired there no way for the guy to wield all the way around the pipe due to were it snapped off. Really just want ...

I ve got an elite 80 1985. There no way to raise , lower or move the handles bars I m guessing. They are what they are? Seem to be made for a 3.5 foot guy.