Honda Spree and Elite 50 Forums

Drilling holes in a air box on what kind of moped..scooter.....?

Happy to report that this sb50 now goes 32-33 with a 285 lbs load ....i didnt even decarbonize the engine or exhaust ....''yet''

BUT wont that give it less low end torque?

My next project will be the NQ50....cant wait..like i said before a tec 17 years ago said it was a cdi box ...we will see...........no kick start so thats gonna suck need a battery to wear down first.......OH i need a correct way to HOTWIRE that scoot onto a toggle ..i am reading some other posts ...

happy to report that the sb50 is up and running.......28 mph with my 285 lbs.......my kids weight a 100 lbs so I am waiting to see what it tops out at........i wish someone would have or...there was a break down on how to clean the carb better with some pics of before and after...mainly because some ...

happy to report that the sb50 is up and running.......28 mph with my 285 lbs.......my kids weight a 100 lbs so I am waiting to see what it tops out at

what is the small round thing rests inside a little cylindrical chamber that is separated from the rest of the gas in the bowl. It appears that there is a tiny little hole that should be connecting this separate chamber from the main bowl. However, that tiny little hole is barley letting anything ...

It idles when i hold my hand over the carb air intake and then allow just enough air to get into the carb.....cleaned the carb 2 times and set the screws to the specs...air filter is cleaned and oiled ,,,,i cant find any air leaks with the carb cleaner spray!

ok putting my hand over the carb air intake now lets it idle .......not perfect but idle...i am going to clean the air filter and so on i also found a lil hole in the air box hole that i am going to try and repair

The spree ran when i was a kid.....tec said it needed a new CDI I have to hunt down the keys and the title still before working on that ...my current project is a sb50 elite e the spree has like 3000 miles on it and is in very good shape :D ... i got them out for my kids for i bought these when I ...

The reason I say its stuck in the down position is because it presses in like all springy and seems longer than pics of others autobystarters. can i test this on a car battery?.........BTW still having ''air leak problems'' the thing will run if i have the airbox of and put 2 fingers over the carb ...

I was bummed when i seen that no one had any more advise on this one!!

ANYONE?????!

1. ok my bystarter is stuck in the down position i guess this isnt that bad? better than being stuck in the up position? 2. can this bystarter be rebuilt or repaired? 3. And for the idle jet is that the little metal tube that is next to the main jet ?....4. does the idle jet go into a hole in the ...

I never put my hand over the carb hole/......will that help .i am going to try that and i will open the carb back up once again...but as i was saying before ...gas in the carb through the air box tube would get me running then i opened up the throttle and got a good high running rev for a few ...