Hi,
OK, I re-cleaned the carb. It turns out the issue was not related to the carb. It is the drive belt and clutch weights (pads). The engine is running fantastic, but the lack of speed is do to the belt and clutch.
Any recommendations for these? I have seen a lot of postings regarding the belt ...
Search found 5 matches
- Mon Jun 16, 2014 11:15 am
- Forum: Technical Help
- Topic: 1988 Elite E - Sluggish Performance
- Replies: 10
- Views: 6422
- Wed Apr 30, 2014 9:56 am
- Forum: Technical Help
- Topic: 1988 Elite E - Sluggish Performance
- Replies: 10
- Views: 6422
Re: 1988 Elite E - Sluggish Performance
Hi,
Yes, it came with the stock airbox. I checked it and it is clean. Good suggestion on the exhaust. It seems the exhaust is flowing freely, but can't hurt to check it.
Thanks,
Yes, it came with the stock airbox. I checked it and it is clean. Good suggestion on the exhaust. It seems the exhaust is flowing freely, but can't hurt to check it.
Thanks,
- Mon Apr 28, 2014 11:41 am
- Forum: Technical Help
- Topic: 1988 Elite E - Sluggish Performance
- Replies: 10
- Views: 6422
Re: 1988 Elite E - Sluggish Performance
Hi,
Yes, I was able to download a PDF copy of the manual which was very helpful.
Thanks,
Pietruck
Yes, I was able to download a PDF copy of the manual which was very helpful.
Thanks,
Pietruck
- Mon Apr 28, 2014 11:32 am
- Forum: Technical Help
- Topic: 1988 Elite E - Sluggish Performance
- Replies: 10
- Views: 6422
Re: 1988 Elite E - Sluggish Performance
Hi swimmingfree,
OK, I will re-clean the carb and see if I get improvement.
Thanks for the quick reply!
Pietruck
OK, I will re-clean the carb and see if I get improvement.
Thanks for the quick reply!
Pietruck
- Mon Apr 28, 2014 10:29 am
- Forum: Technical Help
- Topic: 1988 Elite E - Sluggish Performance
- Replies: 10
- Views: 6422
1988 Elite E - Sluggish Performance
Hi,
I am attempting to bring a 1988 Elite E back to life that I acquired at a garage sale. I have done the following:
1. Cleaned gas tank.
2. Replaced fuel lines.
3. Replaced petcock - previous owner had installed a non vacuum version.
4. Removed and thoroughly cleaned carb.
5. Check spark plug ...
I am attempting to bring a 1988 Elite E back to life that I acquired at a garage sale. I have done the following:
1. Cleaned gas tank.
2. Replaced fuel lines.
3. Replaced petcock - previous owner had installed a non vacuum version.
4. Removed and thoroughly cleaned carb.
5. Check spark plug ...