Honda Spree and Elite 50 Forums

Do you have polini jet kits with smaller then a 120 now,and know what crowd could use the other kit I got from you with 120 and up?

good to hear what others are running.

heres my setup as far as engine stuffs

corsa/ polini cp 23 carb/ stock but derestricted pipe (I know i need to get a pipe)

Ya I got my polini main jet and pilot jet kits from graphite 9 but the lowest i have on the main is 120 in that kit, i was one of the first people to get this carb setup from him wondering if he sent me the jet kit before he realized how small of main that is run on these motors

do you know where ...

hey graphite9 or anyone running polini 23 carb

Im just starting to work on tuning again on my elite

was running 128 Main and 40 pilot top notch on needle, ran strong but rich could only hit 260 degrees at wot

switched to 110 main (smallest i had) 40 pilot middle notch on needle, has a little ...

just picked up and running this carb on my elite/dio (corsa, naruku manifold polini 23mm carb and polini filter with stock pipe) still playing around with jetting but think I've found a good spot at 128 MJ with 40PJ thing really rips and keeps the temps low around 260, looks great and remote choke ...

Wow quick response and with a picture thanks a lot not afraid of a little grinding just making sure I was on the right track

picked up a naruku variator from scooterswapshop.com for my 2000 elite 50 and it won't fit hits the engine casing towards the starter gear? do i need to grind it to make it fit I searched and didn't find anyone talking about grinding it except for ruck variator swaps? any help also have a big bore I ...