Honda Spree and Elite 50 Forums

I was just wondering if i can counteract the slower acceleration of higher gears by putting stronger clutch springs in on my elite, what size/color of springs should i put on (i now have stock springs)

Stay with stock spring, stiff spring has no take off what so ever, but very good top on top ...

oopss. What I meant is, do you have 4k spring now? I have 1500 rpm.

You might be getting the clutch springs (there are 3) confused with the compression spring. I installed the 4,000 rpm clutch springs and a 1,500 compression spring at the same time. I didn't like the clutch springs (no low speed ...

oopss. What I meant is, do you have 4k spring now? I have 1500 rpm.

Karman

what is your set up and what is your top speed?

Where do you get 4k clutch spring and how much?

Yes I have a corsa, and yes the take off is slow. Try 8.44 t o1 gear and let me know how's the take off.

We have the same set up except for the purple wheel

I have Pg long and 7.5 to 1 gear and the take off feels slow but the top speed is good. I gonna try 8.44 to 1 and see if it has a better take off.

I did install polini clutch spring.
I did install hi speed pulley from vt cycle. don't know about the weights.
what weight would you recommend?

I want a better take off speed. How do you do it?

Set up: Polini corsa, 28 mm oko carb, up graded intake manifold, pg long, 1500 rpm spring, polini clutch spring, 7:1 gear, racing cdi.

I have no problem with top speed. I would rather have better take off than top speed. I feel like I have to open ...

Alright felas, got a new project here.
1. new exhaust manifold - installed, done
2. oko 28mm carb & cable - done, what do I do with bystander cable?
3. 7 to 1 gears, how do I remove the gears with out a press.
4. compression spring, any suggestion how to remove the spring.
5 new exhaust. pg long

What kind of exhaust and carb you guys recommend? Anybody selling used parts?

The gas was leaking from carb. The float valve got stuck to open position. I was able to figure it out and clean it. Still running slow on the take off.
The break in process wa to run 300 miles not pass 30mph.

RUNNING ON STOCK CARB AND EXHAUST. TALKED TO KEONI OF VTCYCLES YESTERDAY AND SAID TO GET CLUTCH SPRING AND COMPRESSION SPRING BUT THEY'RE CURRENTLY OUT OF STOCK. I ALSO ASK HIM ABOUT WHAT KIND OF CARB TO GET AND EXHAUST BUT THEY ALSO OUT OF STOCK. IS THERE ANY OTHER PLACE TO GET PARTS BESIDES VT ...

New to this place and scooter world. I purchase 01 honda elite s and started modifying it. Installed polini corsa and keli hi-speed pulley, drilled the exhaust pipe to the max. I did the break in process and then my carb started leaking gas. I clean and adjust the carb and after I put everything ...