Honda Spree and Elite 50 Forums

Yes sir that would be it!

Much appreciated for your time, wisdom, and effort!

With the carburetor off the bike, bowl off, you should be able to take a spray can of carb-cleaner, insert tube into the pilot jet tube and spray. (WEAR safety glasses!!!) Observe down through the throat of the carb and verify that spray is coming through the pilot. With the air-mixture screw ...

There's NO "gasket", but there is an O-ring on the flange.
To remove "emulsifer tube", simply push down on it with a tool through the slide chamber after removing the main jet.


I have an o ring on flange, I just thought metal to metal needed some sort of “crush washer” sorry this is my first ...

There was probably no gasket because my older brother and a neighbor were * with it when they were teenagers so I’m assuming they forgot it

:newb: my dad had a 1984 gyro stored away that hasn’t run in 20 years. I found a gas leak because of no gasket between the carb and inlet manifold. Does anyone know where I could get one of these? Or atleast a size if that’s how they are referred to. I pulled carb apart and not too gunky. Still ...