Honda Spree and Elite 50 Forums

Hello all, I have started a Scooter club for my home valley. The URL is www.wv49s.com It's a local club but I invite you all to check it out and give me some ideas on how to inprove it. What I would really like is a source for free service manuals. We have many Scooter varieties in our club. Thank ...

I replaced the clutch, belt and starter pinion. All seems to work well.
Thank you all for your advice.

How about the roller bearings? I used Lithium grease.

Jerry

I have started replacing the clutch and breaks on my 85 spree. I have the clutch off the drive plate (page 8-10). my question is should I give the clutch pivot pins a light coat of machine oil before I replace the clutch shoes?

Also when I removed the crankcase cover it had no gasket. Should I get ...

Due to weather I hadn't rode my spree for about a week. I put my helmet on and goggles and went on down the road. About a mile later in the fast lane (35 mph four lane) I see this spider climbing around in my goggles. Well I look ahead and the light is red so I think I can get the spider then. Just ...

Here in Eastern Washington State I plan to ride my Spree till November 1st. How long do you plan to ride your Spree?

The tool is called Universal Holder. It can be seen on page 8-6 in the Spree service manual.

Jerry

I plan to remove and replace the clutch this winter and I found the clutch and brake pads at Honda. My question is the manual lists a clutch tool 07725-0030000 that is $43.41 at Honda. Has any one made a homemade one or found somthing else that will work?

Jerry

I'm finished with my coffee/mocha project. Check out my results.

Jerry

http://www.solisearch.net/ims/pic.php?u=21316h5W44&i=147015
http://www.solisearch.net/ims/pic.php?u=21316h5W44&i=147016
http://www.solisearch.net/ims/pic.php?u=21316h5W44&i=147017
http://www.solisearch.net/ims/pic.php?u ...

Very cool!

Do you have to have an endorsement? and what is your MPG?

Jerry

Feel free to post these pictures.

Jerry

P.S I working on a new project. Pictures as soon as I'm done.

If you want to see my cup holder for my 85 Spree go to these web pages.
http://www.solisearch.net/ims/pic.php?u=21316h5W44&i=136104
http://www.solisearch.net/ims/pic.php?u=21316h5W44&i=136105
http://www.solisearch.net/ims/pic.php?u=21316h5W44&i=136106

On the 85 you need to put a piece of metal ...

My 85 Spree only does about 33 mph with a tail wind. I weigh over two hundred pounds. I think thats about all you can expect.

Jerry

I have three pictures, but don't know how to attach them in this forum. I will be happy to email them to you.

Jerry

My email is boxcar382003@yahoo.com

[/img]

I just returned from Walmart and installed my cup holder on my Spree. The cup holder is a Product Detail - ID 05561-1 from Bell. The web page is www.bellautomotive.com/asp/product_details.asp?id=23750. I paid less than two dollars and it works great. All I did was take the bolt that is in the middle ...