Honda Spree and Elite 50 Forums

I don't think they are the same. I used Spree turn signal lights on my Aero, I had to make new brackets to mount them.

Not much is interchangeable between the Spree and Aero.

Philip

Problem solved. Replaced the Spree carb with the Aero carb and it runs fine, jury rigged a temp solution for the broken bystarter.

Philip

Oil cable is connected. Carb is clean and all passages are open. I installed the main jet from the Aero carb into the Spree carb. It's possible the carb that was on the Aero when I got it was incorrect. I noticed that the previous owner had messed with it.

What size jet should I have?

Philip

Here's the problem. Just got the Aero back together and I cannot get it to run decently. I broke the bystarter on the original carb by accident and substituted a good carb off a 84 Spree, changed the main jet also. I replaced the pistons rings and put it all back together.

Bike starts decently but ...

I hope you mean .0015" not .015"

Philip

Yes the mounts are different. The Spree has the bolt hole inline with the kickstand mounting point while the Aero's bolt hole is up about 1" from the kickstand mounting point. I guess If I took the kickstand off it would bolt in no trouble but then I have no kickstand

Did Honda make more then two ...

Engine swap or fork swap?

Philip

Hello All,

A friend of mine gave me a 84 Honda Aero 50cc, runs good but most of plastic is gone or in bad condition. My brother has a 84 Spree with a bad engine but good plastic.

I've searched the forums to see if anyone has used the Aero engine in the Spree successfully (saw a couple of post but ...