Honda Spree and Elite 50 Forums

just wanted to say thanks guys. One of the spree's is all fixed and runs great like before. It was the throttle piston slide. It's keyed and should only be installed one way. I did it this morning and worked like a charm. Now the other scooter the tang that the throttle piston lines up with is for ...

vette--I'm sitting here thinking what the * I did wrong but now that you mentioned the throttle piston slide and I checked in my manual. I think what I did was not put the throttle cable back on properly so the round sleeve doesn't make contact with the idle screew. [/list]

myspree---email your phone number to fst351@aol.com and I would like you to come by and check these spree's out. I just took it for a ride and basically, no matter even if I screw in the idle and the air/fuel screw in all the way the spree still runs at full throttle. What's up with that?

well, I'm still having the same problems. stuck at full throttle, doesn't matter if I move the throttle or air/mix screw it's doing the same thing

the throttle works fine I think. before start up I look at the carb and pull the throttle and can watch the needle go up and down. How do I adjust the idle jet. Please let me know.

carb is not stripped and the needle is in the right way. I can't get this thing to run. Also it will only start with starting fluid. I don't know what to do. Anyone from MI that wants to help, willing to pay. Need this fixed by Saturday Aug 20

Well, both my spree's were in good running condition but for some reason both now have the same problem. I need to use starting fluid to get them running and once they fire up they idle at full throttle. No matter if you twist the throttle or not nothing happens. What do I do about this? In the ...

I'll be there for the cruise. Trying to get both my spree's going to "cruise" in