Honda Spree and Elite 50 Forums

first, I appreciate you taking the time bones. seems like the links disappeared, or got deleted I managed to fine what was one of them I believe, but its the one located in Florida, ill link it below. as far as jetting, my temps never reach 300 and my plug is chocolate milk every time I check it, I ...

Also, I see the opening at the engine side of the stock carb is about 17mm, but the inner diameter of the stock carb is smaller, are these ones on ebay larger? Appreciate the education, not much documentation for learning on my own out there!

I like the looks of that first one, unless they’re both the same, I haven’t don’t a TON of research on carbs, but it would be nice to have one with better “tune-ability” I wouldn’t mine. A few more mph, I’d like to be able to go 55 to keep up with traffic but with the stock 11:1 the engine would ...

I cannot remember if I installed reeds or not with the polini kit. I put the polini Variator on today and I actually lost 2mph top end, and taking off was very sluggish, so I put the stock back on. I honestly believe the gas in the carb is boiling a bit or something. I can shut it off and itll fire ...

Appreciate the reply. I’ve tried it with and without the bystarter cover, polished the needle seat yesterday, I can keep vacuum on the Petcock for 5 min and no leaks so it’s working good, I don’t have a temp gauge but am getting today. Plug is a bit darker than cardboard. There’s a lot going on here ...

Have an 86 Aero 50 with a Polini BBK I put on 20 years ago, After riding, I am having an issue with fuel coming out of the carb vent/breather at the front of the carb, it’s not a steady stream, just some drips on the ground after sitting for a bit after riding, usually after I shut it off. Like a ...

Just a thought, if you got the same kit is me, it doesnt dound like it, but did you make sure the piston went in the right way? my kit had one side of the piston with ports, so it was important to install right, if not, I would say upjet, what size jet are you running now?

Yes, But you can program the tire size on many computers, that is what I was condering, if It would work.

Hey, I was wondering If anybody has installed a Bike Computer on their scooter for Speed readout, You could easily install the magnet on the rim and receiver on the forks, but Would it be accurate on such a small tire at about 55mph max? My Aero pegs at about 44, and I need a different speed readout ...

Yep, that is the guy, oh well. I want to get the carb from him I think, as his carb comes with reeds, intake, and air filter, where as if I get one from VT cycles, it is hald the price, but it does not come with any of that I dont think. What size should I get do you guys think to feed the 70cc? The ...

The guy I bought my 70cc kit from had a lot of performance parts for the aero, I just need to contact him. I am also going to get a bigger carb to feed the bigger engine, and get the thing moving.

Yeah, its an 86, the closeup pic of the engine I did not have the kickstart on, but it is on on the other pics. 85 did not have a kickstart, the original case that was on it was not the right one, the kickstart case was not on it for some reason, but I painted and put it on. But its for sure an 86 ...

I havent posted on this board since about late last fall, dont know if you guys remember me, I was restoring an 86 Honda Aero 50 that we have had since 86, I have a lot of questions about aftermarket exhaust, and the 70cc kit, and painting. Well, it has been done now since then, and it is finally ...

is a #80 jet too big to use?

I got my friends spree going, I did the intake mod, and I can tell it is running lean with #65 jet. I have a #80 jet out of my aero, it that way too big? if so, where can i get a #68? or other sizes?

Thanks!