Honda Spree and Elite 50 Forums

Im going back over there tonight, so ill go ahead and pop the carb off and give it a good once over. thanks for the help

So Im working on this 2002 elite 80 for this lady to see if i can get it running for her, Its been sitting a year, guessing i should just take the carb off and clean it but before i do that heres something i notice, I was messing with it, and dont know why i did it but I did. I put my finger in the ...

ahhhh thanks a bunch, it works good now.

now just gotta wait for my piston, rings, and gaskets to show up, and ill be in business.

is the need inside the carb from the throttle cable suppose to go up and down?

I noticed the throttle cable is really stiff and only moves about 1/4 of a turn then just stops and the cable just tenses up. It just doesnt seem right.

I pull it all apart and relubed the cable it slides perfectly and ...

10,596 to be exact

unless for some reason some one a hooked the speedo to a drill them im pretty sure thats how much its got.




thanks for the link I appreciate it

Im just learning about these 2 strokes, So you cant break these in like a 4 stroke? Where you once its gets to operating temp you run it hard and lots of decell to pull alot of vacuum to help seal the rings?

Thats the method i have always done for 4 strokes, but since im about to rebuild a 2 stroke ...

Well it can be honed, but if it wasnt outrageous i figure just buy a new one.

The scraches are pretty deep on the exhaust side.

the bottom piston ring was stuck to the piston from the wear.

Are the odometers in kmh, or miles

its got 10000 on it according to the odometer.

is there a site on the ...

Hi, Im currently working on a 84 Honda spree, My friend dropped it off in hopes of me getting it running for him, Sounded like low compression, so i pulled the top end apart and there is some pretty nasty scoring on the exhaust side, Looks like it needs new rings, piston, and head.

Or bigger piston ...