Search found 4 matches

by jeepvolks
Sat Jun 13, 2009 11:49 am
Forum: Technical Help
Topic: 1986 Aero 50 start/idle/running issues
Replies: 1
Views: 1075

1986 Aero 50 start/idle/running issues

I have the Aero running great at full speed. It doesnÔÇÖt stutter or stall at a continuous 35mph. However, at idle, it runs at a fair idle for about 10 seconds and then drops down to where it barely runs for about 10 seconds. It will go through this cycle as long as you let it sit on the kickstand ...
by jeepvolks
Wed Jul 16, 2008 9:12 pm
Forum: Technical Help
Topic: Honda Aero 80 poor running
Replies: 13
Views: 4125

I have an 83 Aero 80 that was put together from boxes of stuff where the previous owner had taken it apart. Anyway, I had issues getting it to run right. I think I ended up replacing all of the vacuum lines, fuel lines, jets and gaskets in the carb. After all of that, it ran well, but took 5 minutes ...
by jeepvolks
Tue Jul 15, 2008 2:34 pm
Forum: Technical Help
Topic: 1987 Elite 50s rough acceleration
Replies: 4
Views: 1960

1987 Elite 50s rough acceleration

I've only had this machine since Saturday and I've almost brought it back from certain death. Anyway, it starts instantly and idles great. It also runs great at top speed around 35mph. When you start off from a dead stop or from a slow rolling speed, it stutters and bogs and then finally takes off ...
by jeepvolks
Tue Jul 15, 2008 2:26 pm
Forum: Technical Help
Topic: replacement air cleaner material for Elite???
Replies: 3
Views: 1777

I picked up some high density foam at a fabric store; Joannes to be exact. I found an odd piece and paid $1.03 for it. I'm only using it until I get the new one from Honda Parts Direct. It's less than $10.00