Honda Spree and Elite 50 Forums

Got it from the org. owner and its CLEAN! 1200 miles on it, with the exception very few small scuffs here and there its spotless.

I ran my 50mm BB kit with 15/42 gears for break in with stock carb and didn't care for it at all. No top end outa that setup . If I ran a stock carb and exhaust I'd ...

Ok so I have a 99 elite sr that I put a taz 50mm BB/gears on and its pretty nice.
Just got a 96 elite S and want to build somthing faster. Want to use it on small rides, camping, running around town or up to the store on a beer run.

My question is how much can I do to this engine and still be ...

thanks guys! Any one on the exhaust port and or carb jetting?

Forgot to ask about the clutch springs? Where to get them mainly.

Ok got a killer $200 deal on a clean 98 elite sr off of CL in michigan. Its got about 2000 miles on it and needs a new top end . It was purpose bought to build a mild rider for playing around on camping trips and such due to its light weight and ease of loading up to travel. I have a built zuma that ...

Have some troubles with the clutch on a 86 spree. The clutch is not returning the belt up to top, and then it bogs and slips the belt. I have the trans cover off and if I pull the belt down into the clutch to open it I can pull belt back up and clutch does not return to closed pos. Clutch looks ...

if you mean the stator lead, the oms tested out good. not sure how to test this with the motor spinning? meter in volts, or auto tester w/ light?

Any one know how to test the cdi box on a 86 spree? Already tested the cdi plug for the coils, but did'nt see any thing in the manual or any post on testing the box it self. Any help on what terminals? thanks