Honda Spree and Elite 50 Forums

thanks...what about main jets? does a 65 have a smaller hole than a 68? is a 62 the smallest?

what do you mean by slots? how are the sizes on the jets.......bigger number smaller hole or the other way around?

Thanks

Thanks! One other thing.......what is the redline or max RPM for the motor?

Does anyone know if the plug fires once per revolution, twice per revolution, or every other revolution? I have a digital tach from ENM Co. and to set it up properly I need to tell it how often it fires per rev. It is a cool little tach. It is digital and it reads RPMs, records hours, and you can ...

I am new to the spree but when i was trying to get mine running i checked everything and couldnt figure it out. then i remembered seeing the word decarbonize in the manual and thought why not check the cylinder. i took off the head and i was shocked! the whole exhaust port was completely plugged ...

thanks, i will check that. is there a tool to hold the flywheel on the clutch in place while i loosen the nut? also, my spree is not Iowa, but it only goes 25-26 mph

Thank you all for the replies. I will check on the Iowa issue today. Is the the idle jet supposed to allow air through, because I tried piano wire and air and I got nothing. As far as the acceleration I know that it is supposed to be a little slow at the start but it feels like its not getting ...

My neighbor was going to throw his 86 spree away because he couldnt get it started. I told him I would take it. Put a new innertube, battery, and autobypass doodad and now it runs. I now have two problems. The first is that I cleaned the crap out of the carb and I couldnt get air into the jet next ...