Honda Spree and Elite 50 Forums

After tampering with many things (cleaned the carb and others) I checked to see if I had spark. I couldn't get a spark. So I guess all along that was the problem. It has a brand new spark plug on there with proper gap I might just break down and go to a shop if electrical things are quite difficult ...

Hey man where are you getting the work done? Most shops in Toronto won't touch the spree with a stick except cycle 109 and scooters on front I need to find a decent place to check out the spree dunno what's wrong with it.

I checked the compression and it's around 113 so I'm guessing it must be some obstruction with the gas? When I took out the new plug I put it was slightly wet, Is it flooded?

Daaamn I'm getting ripped off here in Toronto. Insurance for bikes here is extremely high anyway so I thought I'd buy a 49cc ride it for a bit to get my rates to go down I'm 22 with my full motorcycle license and safety courses and still 1200 a year liability only on the spree. (You need a ...

I shall check the compression tonight and it should be up from what I read about 113 psi right.
Thanks again guys. This sites amazing even the pointless arguments from hijacked threads are good for a laugh.

My other ride soon to be sold... No more money

92 civic vx with a ls vtec swap tein coilovers and a couple other goodies. Insurance is a b**** here. Spree alone is $1200 a year

Hi guys,

The other day I let my friend take the spree out for the day and when I got it back it didn't run but it was driving right into my parking garage so it must have worked until she turned it off. She ran it for about 1 hr probably close to around 55-65 km/h the whole way I had just bought it ...

I ended up just using K and N Air Filter Cleaner worked quite well, and seems like my standard spark plug wrench did the trick. Stupid shop guys told me I needed some special spark plug spanner I thought it might have been because of clearence or something. ahh wellb

Hey
Ya I read through the tech docs, manual and searched but can't find any real clear answers on that stuff, so was just wondering what would be best to clean the filter with just to make sure I won't use anything to flammable and would clean it throughly. And the spanner, the spark plug wrench I ...

Hey Guys
I was just wondering what size spanner is needed for the standard NGK bpr6hsa plugs. What do you recommend to clean the air filter with?
Thanks

I've heard it's best to stick 87 oct. Maybe the hot temp plus the higher oct making the engine run hotter might not be too good but I dunno I'm a noob with scooters.

Thanks a lot i was worried I couldn't find a place were the tube went. Is there anywhere I should secure the tube to since it's just hanging?

Hey guys thanks a lot for your help. 8)
I only have one line to install. I guess this line isn't for fuel or an oil line the tube appears to be clear with no smell of gas or oil maybe it's a vacuum tube? Sorry for being such a noob. I see a little metal spout located on the back of the carb? (From ...

Hi Guys,

I've been lurking for a bit but couldn't find what I was looking for in Haynes manual nor the 84-87 spree manual up in the tech docs.

Would someone be kind enough to take some pics of the oil and fuel lines and what the best way of securing them on would be (there were zip ties). Someone ...