elite manual

-aL- · Post by **-aL-** » Fri Oct 21, 2005 10:34 am

there should be some elite manuals in the tech docs... i feel left out

Post by **noiseguy** » Fri Oct 21, 2005 12:31 pm

I need to get over to Derek's and borrow them... are you around this Sunday?

-aL- · Post by **-aL-** » Fri Oct 21, 2005 2:15 pm

it would be a big help to me thanks

Post by **noiseguy** » Fri Oct 21, 2005 3:49 pm

We'll see if I hear back. In the meantime, the Aero 50 manual is pretty close.

gman75 · Post by **gman75** » Fri Oct 28, 2005 10:20 am

I could use an elite manual too. for the '89 SB50 elite...

Greg

Post by **noiseguy** » Mon Oct 31, 2005 10:14 am

NQ50 (Spree) and SB50 (Elite 50) should have nearly (if not exactly) identical motors. If you find differences, I'd be interested in hearing what they are.

vette76 · Post by **vette76** » Mon Oct 31, 2005 11:29 am

cases are a little different. (crank case covers are not interchangeable)
carb is a little different. (oiler injector is in carb as opposed to the intake tract.)

drive pulley is a little bigger in the sb.

gman75 · Post by **gman75** » Tue Nov 01, 2005 11:51 am

Is that an improvement that the elite pulley is bigger than the spree's?

Post by **noiseguy** » Tue Nov 01, 2005 12:43 pm

I don't think the larger SB50 pulley will fit, based on description. You can get quite a bit out of the larger over-the-counter Spree part, with .10" milled from the face and a larger belt (which loses some ratio but helps the clutch work better.)

vette76 · Post by **vette76** » Tue Nov 01, 2005 2:28 pm

no, it will not fit in the spree cases.

Honda Spree and Elite 50 Forums

elite manual

elite manual

thnx