moderator abuse wheelman111

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

ldrancer
BMX
BMX
Posts: 46
Joined: Wed Nov 04, 2009 11:55 am
Location: Ky

moderator abuse wheelman111

Post by ldrancer »

yea ok, so i get a warning for telling some lazy people off.
well, let me explain, so everybody knows wheelman you think your so funny. by the way your jokes are never funny, there side aching sucky.
i made a post asking some questions, about my scooter, a couple of random questions. i just got my scooter. way to treat people too, btw. well, ok so i asked some questions so i could find out somethings about my scooter. i didn't know much about it, like besides starting it and putting in oil and gas. whats there to know besides that, a lot. so i asked some questions, and got hardly any answers. well i asked got answers, then was like ok, let me ask some more. i asked 3 or 4 more questions. waited. nothing. did get offers to buy stuff from wheelman111. the question i got answered was, the stock weights on the honda elite.

he said 8.5. told me pretty sure. well, later i read on another post where he's telling someone, is it 8.5? do you know, can you tell me. yea thanks. maybe i'll tell you your scooter runs on diesel, or maybe water. and doesn't need oil. yea, liar.

so well, later, i made another post, to ask some questions, to find out some stuff about my scooter, so i could do stuff. like for example, does the scooter have a filter, i heard about a close to tank filter, but i couldn't see it, and was wondering, was it a good idea, to run, a, fuel filter. can you do it, and does it need it. before i even post my questions, i have to go trhough posting a reason for reposting the same questions. my topic was old and the questions sat there. wait wait ill find it, so you can see what a non helping person this wheelman111 is. or maybe heck, asking about stock roller weight weights, was not important to him. then my other questions, just he didn't care. heck nobody answers my questions. look viewtopic.php?f=3&t=12083 so i make an explanation on the top of my post, saying i was reasking my questions, so that nobody would ban me or delte my post and call it garbage or say don't repost. something like that. i explaijned. the top 10 lines so i could ask some questions. which never got answered, and find an answer to them anwhere else here. your moderator wheelman111 is abusive. useless post, if my questions are usuelss, then whatever. this board is. my questions never get answered i get attacked, i try to respond, and then abused by wheelman the travelling garbagse salemen who after i asked some questions, tried for around 3 hours to get me to buy his parts. yea thanks im not buying your stuff, im worried about getting my stuff fixed. get bent. take your stuff somewhere else. peddle it elsewhere it's not wanted here. didn't even know he was a moderator. well. and also i don't need other people like mookie or shelton coming in and running their mouths. they add nothing. and then in the zx post, heck i posted numbers, talking about the chinese part of the zx transmission, i guess you guys don't care. i have to go on, and put up with for how long, someone just :jack: :jack: :jack: :jack: :jack: :jack: :jack: :jack:
yea that's all he does, saying crap about what im talking about, i pointed out i was giving measurements, but nope, and noone said anything but ignored me. well take this and shove it. wow. yea warn me, hey take your warez elsewhere and peddle them noone wants them, you travelling garbage salemen.

can't contribute, can't ask. there is no board here with wheelman111 around. and also, the things you think you can get away with, then have wheelman jumping on your *, pfft. get him off me. i was defending myself in my post, i won't put up with there garbage.
anyway im sorta getting lost here.

A CASE OF MODERATOR ABUSE, OR HOW TO AVOID THE SHADY SALEMEN.

:a contribution.. by ME

ok im going to explain this by example. .... here's an example for slow people....
You go on a board. You just got a scooter. Brought it in, and well, it's not your first. It's your second. You know a couple of things. it's a 2001, and you know some servicing needs done to it, from the people you bought it off of. You sign onto a board. You ask some questions. You know your scooter needs some work done, so you ask some questions, not how to do it, but some technical questions about the scooter. You've already checked all of the manuals they have. No mention, and a search feature, got you no information you needed. So you have to click the New Post button, and ask everyone a question. You post is put and you leave it as to ask more questions later, saying you just bought the scooter, and want to know some stuff. You want to know how to clean and service other things. Your questions get answered, by someone, the answer is half believable, a good guess could get you that, and you don't believe it, but go along with it. The guy who answers, makes it out like it's the definitive answer. As in his answer is right. You agree, at least that's what he likes to think, and put in some stock old weights you have laying around from another, different country made, scooter. Well, there roller weights, you say, how can they go cheap on these. That can be found out, but your weights have 800 miles on them and look in good shape. Can you imagine something like that tearing up quickly.

Well, that service on that one part of your scooter, is more or less, finished through. You come back with some more questions, you had left your post open for more questions, and ask about some other stuff, knowing your scooter needs more servicing stuff done. So you need to ask some more questions. You know stuff needs greased, and cleaned. So you ask a series of about 3 to 4 maybe up to 6 more questions. Everything you don't know about and is techical about this scooter. Well of course, you ask, after explaining to some guy on simplyfying math. It's called common denominator is the math problem. Well, the one guy messages you up, trying to sell you a part. actually it was after you went to one of tehre posts about the same scooter you have, asking if parts from different years where compatible. It was about the same part in your question that you said was messed up. Well, your questions on your post never got answered. Not any. after the first questoin, the other 3-6 different questions, and confirmations, where never answered. They where ignored. Well, they try to sell you a part. And all your worried about is getting your part fixed. Your question was, is this part interchangable, mine has errors. On a scale of 1-10 the errors would have to be around a 6. Not needed now, but can have some bad stuff happen if not taken care of. But it's needed around 15 dollars and a part ordered to finsih messing with. I wasn't concerned with the part. I wasn't concerned about anything else. And later, had to actually ask what was needed to make my part i had picked up to replace, at a junkyard, compatible. Before anyone answered, I actually checked each part number and found out. Someone answered very frankly. Quick, cold answer. Yea thanks a lot. I actually checked that myself, before you, you say to yourself. oh and outloud.
You finally find out what you need.

the moral of this story is.. when you first buy something, and you have some guy come over to you trying to sell you something, and there hiding it to you, trying to keep from everybody else seeing it, don't buy it.
your a noob and they know that, they know you dn't need it and would sell you anything and say it'll do better.
heres what would of happenned if i bought it......
well what did you knwo about me, i was new, and had just bought a stock used scooter.
that doesn't insinuate a thing. it doesn't mean i'm going to keep it like that. people want to put big bore kits on there scooters.
what would of happenned to me if i had buoght it. i would of blown a big bore kit on it, from revving the engine too high. wanna read wheelman111 himself saying it, go read his wanted for sale ads in the wanted for sale section. oh and by the way, he said it was for 94-98. well i had 94-98 part and was wanting to change, i had a 2001 scooter. with my part it would of worked, if i had the part i didn't have. which i didn't have. he didn't tell me, and when i asked, in my post about using the part he didn't tell me. the part i was wanting to change to replace my error part, from my 2001 scooter. Ok, he didn't tell me it was for 94-98, he said i'll sell it to you, and buy your part form you for a certain amount of money. which would of left me with a bunch of different parts from different uncompatible years of scooters. and out a whole bunch of money. he said buy this and i'll buy that from you. you can buy, is what i get from it. i can sell to him, he said, maybe. well i would of ended up with 94-98 gears, and my error 2001 cover which wouldn't of fit and a 2001 scooter. how nice. he later said in a post, the gears where for 94-98, but maybe pressed off they would be usable, but i'd still be left with my error. and a set of gears with a big bore kit, i would of revved out the scooter and blew the engine. he said that too. i didn't even need them.
stay away. is the moral of the story. they're garbage salesmen, junk salesmen, but hey even they can have some good stuff, yoru a garbage salesmen and you never wanted your story of bad salesmen to get out. your a garbage salesmen. i stay away form people like you. unless you had any morals, and i don't know if i'd find them so what are you doing warning me, im warning you to stay away from me. far away.

good story huh.

can i go on. i have more. i think i'll just dabble some. i'm bored and have nothing else to do.
ok so finally i find out what i need to switch over my gear cover so i don't have the error part anymore. and i go and get the parts. i say i have them. but i need the gasket. so i gotta get that. well, it comes in. and some guys in the wanted for sale section asking for a gear. then he's told he need 94-98 if he has that year, and he does. so he needs the 94-98 gear, which i have. wheelman111 told him he needed that part. then wheelman111 is going around making posts, saying he wants to buy the 94-98 gear cover. i have that part too, i need it. i need that part and the gears to change over. is it some kind of guilt trip he's trying to get on me to get me to sell my needed parts to other people. after thinking about it, you don't heli-coil a gear oil screw. would i try and sell the part later, no, not unless someone was interested, but it's trashed.
so there was a guilt trip wheelman111 tried ot lay on me, to get me to sell my needed parts, i needed those. to him and some other guy who needed the other part. i need those for my transmission. if someone needs the gear, i have it. why does he need another one, probably not for me to ask, but he already has a cover, because he's been using the gear.
end of story. the garbage salesmen tries to lay guilt trips on people to get them to do what he wants. stay far away from me wheelman, and he wouldn't even respond back to my response back to him. i can say what i want, i don't ahve to put up with that stuff. you know, if you want to go on about language, and fighting, get both people, not me.
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: moderator abuse wheelman111

Post by aerorob »

wheelman has actually been quite helpfull towards me..
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
bigluelok
Spree
Spree
Posts: 297
Joined: Thu Apr 10, 2008 3:49 pm
Location: SoCal. SGV to be exact

Re: moderator abuse wheelman111

Post by bigluelok »

wheelman111 has been helpful to me since day 1
CH80
Shelton
Spree
Spree
Posts: 124
Joined: Sat Sep 26, 2009 1:36 am
Location: Carrollton , Georgia
Contact:

Re: moderator abuse wheelman111

Post by Shelton »

Wheelman is the greatest ! :bowrofl:
1984 Spree , 1985 Spree , 1986 Spree , 1987 Spree , 1987 Spree
1985 Spree , 1986 Spree , 1986 Spree , 1987 Spree

Trae Shelton
Georgia

http://www.jbarsbuckingbullco.com
User avatar
odinxxix
CB900F
CB900F
Posts: 1628
Joined: Mon Jun 15, 2009 1:09 pm
Location: lafayette,Indiana

Re: moderator abuse wheelman111

Post by odinxxix »

:imo: WHEELMAN111 HAS ALWAYS HELPED ME NO MATTER WHAT, EVEN IF I ASKED THE SAME QUESTION SEVERAL TIMES!!! he always makes sure you understand what he is trying to say. his jokes i think are humorous i laugh everytime. i have read some of your posts and are really hard to read and decifer. maybe if you took the time to think out your questions before you type them wheelman and the rest of us could better help you.
HELP US HELP YOU!!!, if you still cant find your filter it is behind the petcock take it off and woala. yes you can add an inline filter. what else you need to know? but this time make it more legible so we dont have to read between the lines here. :crazy: number them if you have to EX:
1. where is the filter you speak of
2. can i add an inline filter
3 balh blah
i think this post is :bs: moderator abuse? please.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
workdog
Spree
Spree
Posts: 239
Joined: Tue Aug 11, 2009 2:16 pm
Location: Salt Lake City, Utah
Contact:

Re: moderator abuse wheelman111

Post by workdog »

Wheelman is awesome.
83 Honda Aero 80
Honda Aero80 and Aero50 parts for sale cheap.
http://www.hondaspree.net/phpBB3/viewto ... =2&t=15095
My Aero50 engine swap:
http://www.hondaspree.net/phpBB3/viewto ... 16&t=13021
User avatar
mr pibbs
Veteran OG
Veteran OG
Posts: 602
Joined: Sat Jun 20, 2009 10:22 pm
Location: Tampa, FL

Re: moderator abuse wheelman111

Post by mr pibbs »

Wheelman is awesome.
Agreed.


ldrancer wrote:i don't ahve to put up with that stuff.
And yet here we are.
1993 Elite - The Mad Max
nacree
Spree
Spree
Posts: 128
Joined: Wed Aug 05, 2009 11:50 am

Re: moderator abuse wheelman111

Post by nacree »

[quote="ldrancer"]yea ok, so i get a warning for telling some lazy people off.
quote]

Reading your posts is embarrasing. You really should go somewhere else if you want to behave like a child. It would also be helpful to learn a little grammar and composition if you do not want to come across like and uneducated dolt.

-Nathan
User avatar
novs86
Veteran OG
Veteran OG
Posts: 674
Joined: Sun Jun 14, 2009 10:38 pm
Location: DFW Texas

Re: moderator abuse wheelman111

Post by novs86 »

Even though wheelman's sarcasm can get a little old.

My scooter wouldn't be running now without him!

His thread's have been the biggest help for me out of everyone's on here bar none!!!!!!!
I'd rather be riding my Aero!
ldrancer
BMX
BMX
Posts: 46
Joined: Wed Nov 04, 2009 11:55 am
Location: Ky

Re: moderator abuse wheelman111

Post by ldrancer »

well that's all your opinions. maybe he got a little too near me. im not *. i take it offensively. yea ok so get it.
to the insults, whatever, i was letting off steam. too complicated for you.
Eft37
Elite
Elite
Posts: 370
Joined: Mon Jul 28, 2008 2:49 pm
Location: 60201 (Evanston, IL)

Re: moderator abuse wheelman111

Post by Eft37 »

oh boo hoo, I asked a bunch of questions I could have found the answers to easily by using this forum's search function, someone who's hilarious made a snide comment and then tried to help me but I don't get it. Wah! :cry:
Someone please hold my hand.
:cry:

I'm coming off like a moron, I'm sorry.
Check this link, stud:
http://www.wikihow.com/Use-You're-and-Your
User avatar
odinxxix
CB900F
CB900F
Posts: 1628
Joined: Mon Jun 15, 2009 1:09 pm
Location: lafayette,Indiana

Re: moderator abuse wheelman111

Post by odinxxix »

did anybody read anywhere when wheelman was trying to help this.....person that he was *? i sure didnt. who said anything about that?. :crazy: :*:
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
User avatar
z50r-ghost
CB900F
CB900F
Posts: 1087
Joined: Fri Sep 12, 2008 3:46 am
Location: blank

Re: moderator abuse wheelman111

Post by z50r-ghost »

all i will say is i love wheelman.... :love:

other than that i should stay out of this one...

jc
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.

>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story


1990HONDANS50F
********************
User avatar
Spreetard
Elite
Elite
Posts: 800
Joined: Mon May 04, 2009 7:28 pm
Location: Manistee, Mi

Re: moderator abuse wheelman111

Post by Spreetard »

Wheelman??? I know your not thinking of the same wheelman111 I am.
The one i know is funny. And very helpful. And has great feedback as a seller.
On top of that he takes horrible pictures, and is a traitor to Areo-dom (He shoulda swapped a DIO :mrgreen: ).
Ol' Red
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: moderator abuse wheelman111

Post by Wheelman-111 »

Greetings:

Thanks dudes. I'm a little verklempt! :cry:

I am trying to keep an even hand and follow Noisy-san's directions. I welcome rational criticism. The reason for the warning can be found here:

viewtopic.php?f=1&t=10517

I believe the phrase "Stinking Pricks" qualifies as an insult and/or personal attack. Noiseguy can decide, I'm recusing myself from this issue.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Locked