PLEASE HELP! Resurrecting 1987 SE50P Elite and derestriction
Moderator: Moderator
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
one thing that i love about these scooters is the small things are pretty cheap it seems. body panels are annother story though... 100 bucks a pop for rear shell halves.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
I think I will try to put the dead one back on and see how well it runs. The guy I bought from said it ran great before the clutch had blown up.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Yeah it needed a signal lens that I ordered at the same time $10 not too bad considering it is OEM
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
if its really bad i wouldnt put it back in.. you dont want to suck it into your intake. but if its just a little old i dont see too much harm in it.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
I think I have all the parts needed to make it a runner just need to transfer the title and license it. 

Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
It is junk by my standards but likely will get me by till next week. My buddy says run it but, I'm a little more picky. I just want to smooth out the engine
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
nice, are you going to try and use the old filter and get it running again today? let us know how that goes.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
I will probably work on it tomorrow. I need to change out the front rim and work on shining up the body panels. Putting in the LED lights etc
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
any progress with the elite?
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Put the filter on and drained the battery trying to start, It wasn't charged well
Recharging now 


Last edited by martynkim on Sat Jan 23, 2010 5:35 pm, edited 1 time in total.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Hey aerorob ur in Oregon right? What are the laws on scooter titles my buddy bought a 86 Spree this morning with Oregon plates but no title. What can he do to get it? It hasn't been licensed since 91
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
he has to go to the dmv and get a ton of paperwork to apply for a title, its possible, but difficult. best bet would be to go to the dmv and ask exactly what you have to do.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
I RODE IT!!!
It smoked horrible but I rode it!
It is getting better needs adjustments on alot speedo not working front tire needs to be better balanced. I think the oil pump might be bad or I just need to run it more to get the oil residue out since the cylinder was so full of oil.





- Attachments
-
- phpXlXCaIPM.jpg (23.7 KiB) Viewed 5829 times
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Yup it stopped smoking has a little hesitation accelerates great rode it for about 20 minutes it just won't idle 

- Attachments
-
- phpvYSeZyPM.jpg (25.44 KiB) Viewed 5817 times
-
- phpvYSeZyPM.jpg (25.44 KiB) Viewed 5817 times
-
- phpXlXCaIPM.jpg (23.7 KiB) Viewed 5820 times
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Wrong picture
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts