PLEASE HELP! Resurrecting 1987 SE50P Elite and derestriction

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by aerorob »

one thing that i love about these scooters is the small things are pretty cheap it seems. body panels are annother story though... 100 bucks a pop for rear shell halves.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

I think I will try to put the dead one back on and see how well it runs. The guy I bought from said it ran great before the clutch had blown up.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

Yeah it needed a signal lens that I ordered at the same time $10 not too bad considering it is OEM
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by aerorob »

if its really bad i wouldnt put it back in.. you dont want to suck it into your intake. but if its just a little old i dont see too much harm in it.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

I think I have all the parts needed to make it a runner just need to transfer the title and license it. :ndance:
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

It is junk by my standards but likely will get me by till next week. My buddy says run it but, I'm a little more picky. I just want to smooth out the engine
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by aerorob »

nice, are you going to try and use the old filter and get it running again today? let us know how that goes.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

I will probably work on it tomorrow. I need to change out the front rim and work on shining up the body panels. Putting in the LED lights etc
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by aerorob »

any progress with the elite?
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

Put the filter on and drained the battery trying to start, It wasn't charged well :wink: Recharging now :happy:
Last edited by martynkim on Sat Jan 23, 2010 5:35 pm, edited 1 time in total.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

Hey aerorob ur in Oregon right? What are the laws on scooter titles my buddy bought a 86 Spree this morning with Oregon plates but no title. What can he do to get it? It hasn't been licensed since 91
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by aerorob »

he has to go to the dmv and get a ton of paperwork to apply for a title, its possible, but difficult. best bet would be to go to the dmv and ask exactly what you have to do.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

I RODE IT!!! :coolcruise: It smoked horrible but I rode it! :*: It is getting better needs adjustments on alot speedo not working front tire needs to be better balanced. I think the oil pump might be bad or I just need to run it more to get the oil residue out since the cylinder was so full of oil. :rock: :woot:
Attachments
phpXlXCaIPM.jpg
phpXlXCaIPM.jpg (23.7 KiB) Viewed 5822 times
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

Yup it stopped smoking has a little hesitation accelerates great rode it for about 20 minutes it just won't idle :love:
Attachments
phpvYSeZyPM.jpg
phpvYSeZyPM.jpg (25.44 KiB) Viewed 5810 times
phpvYSeZyPM.jpg
phpvYSeZyPM.jpg (25.44 KiB) Viewed 5810 times
phpXlXCaIPM.jpg
phpXlXCaIPM.jpg (23.7 KiB) Viewed 5813 times
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]

Post by martynkim »

Wrong picture
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Post Reply