Won't idle? I don't want to go through the 9 pages of thread to check, but did you clean the crap out of pilot jet?martynkim wrote:Yup it stopped smoking has a little hesitation accelerates great rode it for about 20 minutes it just won't idle
PLEASE HELP! Resurrecting 1987 SE50P Elite and derestriction
Moderator: Moderator
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
he said he cleaned the carb, but the pilot jet is easily missed if he doesnt know what to look for.
to clean your pilot you need the smallest guitar string, carb clean, some compressed air.
to clean your pilot you need the smallest guitar string, carb clean, some compressed air.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Pilot jet??? I split the case removed all the screws float rubber threw it into a container full of carb cleaner let it sit overnight then blew an entire can of cleaner thru it blew it out with compressed air the more it runs the better it is getting. sometimes it won't start but if you walk away for awile 3-5 min it starts right up
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Still smokin comes and goes depends how hot the engine is. Hoping it will burn off
- Attachments
-
- phppBoxbsPM.jpg (18.76 KiB) Viewed 5430 times
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
yeah that is alot of oil you are buring off. is it starting to go away or is it contunuing?
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
It comes and goes depends how warm the engine is
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
BTW I don't even know where or what the pilot jet is... 

Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
tiny little brass tube that sticks out like the main jet tube, but its about a quarter the diameter. runs parralell of the main jet tube. you need a guitar string of the smallest size to be able to get it through the hole. that gives you your fuel for idle.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
I was looking for that but I didn't notice it. I seen them on different carbs before, I wouldn't think it was missing. 

Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
if your scooter is starting, im sure it is not missing. the pilot jet getting cleaned is worth enough to remove your carb to clean it.
i got this picture from this forum and labeled pilot jet. that will give you all sorts of issues.
i got this picture from this forum and labeled pilot jet. that will give you all sorts of issues.
- Attachments
-
- snv31880.jpg (46.84 KiB) Viewed 5353 times
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Yup that's what I was talking about.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
I blew cleaner thru it and air.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
good. will it idle now? and have you gotten a new air filter element yet?
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
- martynkim
- Board Supporter
- Posts: 2377
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
No, I did that initially. And the filter won't be here till wed-thurs
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: PLEASE HELP!!!! [Resurrecting 1987 SE50 Elite -Ed.]
Did you clean the hole in bowl out good too? pic borrowed from http://www.hondaspree.net/phpBB3/viewto ... f=5&t=8786
If it's clean you will be able to go into a very dark room and shine flashlight down the hole and see the light at that small hole in bowl.

If it's clean you will be able to go into a very dark room and shine flashlight down the hole and see the light at that small hole in bowl.

2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.