sa50p 9:1 gear set

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
premix56
BMX
BMX
Posts: 21
Joined: Fri May 07, 2010 12:24 am

sa50p 9:1 gear set

Post by premix56 »

Looking for more top speed for my scoot. Looking for a 9:1 gear set for my 01 sa50p new or used. Couldn't find anything on ebay or vtcycles. What's a good price for new? Thanx
Sa50p: port/polish, custom vari, 88mj, restrictions removed. 47 mph
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: sa50p 9:1 gear set

Post by aerorob »

If you can wait about a week I will sell my used ones to you. I'm going to 8.4:1 gears. Name a price.
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
premix56
BMX
BMX
Posts: 21
Joined: Fri May 07, 2010 12:24 am

Re: sa50p 9:1 gear set

Post by premix56 »

Sounds good. As far as price its ur stuff. Just let me know what ur thinking. Thanx buddy!
Sa50p: port/polish, custom vari, 88mj, restrictions removed. 47 mph
User avatar
Saved
Spree
Spree
Posts: 288
Joined: Tue Mar 02, 2010 4:08 pm
Location: Schererville, IN

Re: sa50p 9:1 gear set

Post by Saved »

$5? :)
In the barn::
2001 Honda Elite
2002 Yamaha Vino
2007 Roketa Sicily
2006 Ninja 250

Special thanks to:
Workdog & Iggysepia for parts & quick shipping.
Evilone for buying my SA50P.
User avatar
aerorob
Elite
Elite
Posts: 421
Joined: Sat Oct 03, 2009 8:22 pm
Location: portland, or

Re: sa50p 9:1 gear set

Post by aerorob »

Some 8.4 to 1s just sold on here for 35 shipped. Sound fair? Where are you located?
2001 Elite SR48mm big bore, 90/90, keli vari, yws V8 30mm pipe, 8.4:1 gears 62 mph gps
premix56
BMX
BMX
Posts: 21
Joined: Fri May 07, 2010 12:24 am

Re: sa50p 9:1 gear set

Post by premix56 »

$35 sounds great. i am located in grand rapids, mi. let me know when ur ready to get rid of them. consider them sold. thanks
Sa50p: port/polish, custom vari, 88mj, restrictions removed. 47 mph
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: sa50p 9:1 gear set

Post by Wheelman-111 »

Greetings:

Unless derestricted (= drill out washer in the exhaust header, eliminate the variator limiter, and install at least a 78 main jet), your SA50P likely won't go any faster with 9:1s than it does with 12:1s. So Derestricted, it should be capable of ~45 MPH with the 9:1s. Add an aftermarket variator and you can push a reliable 49 MPH.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
premix56
BMX
BMX
Posts: 21
Joined: Fri May 07, 2010 12:24 am

Re: sa50p 9:1 gear set

Post by premix56 »

I have a agressivly ported 2nd over stock cylinder, 88 MJ, aftermarket variator with 9g rollars, derestricted pipe and air box. I'm getting 37mph and I weight 250#. My next step is 2k springs and 9:1 gears.
Sa50p: port/polish, custom vari, 88mj, restrictions removed. 47 mph
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: sa50p 9:1 gear set

Post by Wheelman-111 »

Greetings:

Thanks for setting me straight. Your bike should run over 40 if the cylinder's healthy and the pipe isn't stuffed with carbon. Stock in the 2001 SR were 8.5-gram rollers. Consider 7.5 or even 7s.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
premix56
BMX
BMX
Posts: 21
Joined: Fri May 07, 2010 12:24 am

Re: sa50p 9:1 gear set

Post by premix56 »

I'm hoping for a 45 mph crusing speed.
Sa50p: port/polish, custom vari, 88mj, restrictions removed. 47 mph
Post Reply