starter problems after instaling bbk

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
User avatar
speedfreek700
BMX
BMX
Posts: 21
Joined: Tue Jul 06, 2010 3:20 pm
Location: detroit

starter problems after instaling bbk

Post by speedfreek700 »

hello. i put my 48 bbk on my spree and its running well. my starter motor wont turn the engine over fast enough to fire it up. anyone else have this issue? i tried the starter off my other spree also, same thing. i have 125 lbs compression. i did open my starter up to have a look and cleaned it out. my battery is holding well above 11 volts while im cranking.
its an 84 with no kicker, i think i will have to add kick start. what do you guys think? thanks chris
vette66_00
Spree
Spree
Posts: 141
Joined: Tue May 25, 2010 3:33 pm
Location: Fresno, Ca
Contact:

Re: starter problems after instaling bbk

Post by vette66_00 »

Although I have a Elite E with kick start with the 48mm bbk. Mine did have a little bit of an issue starting at first but now into my 3rd tank of fuel it seems to be fine. It dose hesitate a little still when you first fire it up in the mornings. Also make sure your cables are cleaned well it will help get the amps to the starter.
Last edited by vette66_00 on Mon Jul 19, 2010 7:21 pm, edited 2 times in total.
89 Honda Elite E 48cc bbk and gears all broken in... I get to 35 mph (gps) full out and Im 240 lbs. Need more speed
Image

My toy.. http://www.youtube.com/watch?v=LWgZXLUy25U
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: starter problems after instaling bbk

Post by Trafficjamz »

speedfreek700 wrote:hello. i put my 48 bbk on my spree and its running well. my starter motor wont turn the engine over fast enough to fire it up. anyone else have this issue? i tried the starter off my other spree also, same thing. i have 125 lbs compression. i did open my starter up to have a look and cleaned it out. my battery is holding well above 11 volts while im cranking.
its an 84 with no kicker, i think i will have to add kick start. what do you guys think? thanks chris

Get a kickstart ASAP.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9244
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: starter problems after instaling bbk

Post by Bear45-70 »

Or find a place to add a second battery. Rebuilding the starter probably wouldn't hurt either.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
speedfreek700
BMX
BMX
Posts: 21
Joined: Tue Jul 06, 2010 3:20 pm
Location: detroit

Re: starter problems after instaling bbk

Post by speedfreek700 »

thanks for the input guys. i would like to have a kick starter. do i need to change out the front pilly for the kick star system?
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: starter problems after instaling bbk

Post by Trafficjamz »

speedfreek700 wrote:thanks for the input guys. i would like to have a kick starter. do i need to change out the front pilly for the kick star system?
Yes
from an 86 or 87 spree.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
maddog
CB900F
CB900F
Posts: 2171
Joined: Mon Jul 23, 1973 10:24 am

Re: starter problems after instaling bbk

Post by maddog »

battery charge should read 12.5-13.4
some people dream of speed, i own your dreams!
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9244
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: starter problems after instaling bbk

Post by Bear45-70 »

maddog wrote:battery charge should read 12.5-13.4
On what planet? A truely fully charged battery, sitting static should have better than 12.5 volts, so how will 12.5 volts charge it to full capacity? Battery charging voltage is 13.5 to 14.5 volts. Where do you get you information?
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
speedfreek700
BMX
BMX
Posts: 21
Joined: Tue Jul 06, 2010 3:20 pm
Location: detroit

Re: starter problems after instaling bbk

Post by speedfreek700 »

update on my starting problem. i added kickstart to get me going,after a tank of mix my electric start will now turn it fast enough to start. now im on to fooling with the carb to get her right. seems way rich with the 100 jet.
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: starter problems after instaling bbk

Post by Trafficjamz »

speedfreek700 wrote:update on my starting problem. i added kickstart to get me going,after a tank of mix my electric start will now turn it fast enough to start. now im on to fooling with the carb to get her right. seems way rich with the 100 jet.
What air filter are you using?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
toboggan
Elite
Elite
Posts: 744
Joined: Sat Mar 21, 2009 2:55 pm

Re: starter problems after instaling bbk

Post by toboggan »

put a pod filter on it, and take the stock box off if you want to continue using the 100 main jet. i can get you a new k&n filter for 20$ shipped in a chrome color. let me know!

if you want to use just the stock box, rejet to a 95 see how that goes. do plug chops along the way too!
Post Reply