starter problems after instaling bbk
Moderator: Moderator
- speedfreek700
- BMX

- Posts: 21
- Joined: Tue Jul 06, 2010 3:20 pm
- Location: detroit
starter problems after instaling bbk
hello. i put my 48 bbk on my spree and its running well. my starter motor wont turn the engine over fast enough to fire it up. anyone else have this issue? i tried the starter off my other spree also, same thing. i have 125 lbs compression. i did open my starter up to have a look and cleaned it out. my battery is holding well above 11 volts while im cranking.
its an 84 with no kicker, i think i will have to add kick start. what do you guys think? thanks chris
its an 84 with no kicker, i think i will have to add kick start. what do you guys think? thanks chris
-
vette66_00
- Spree

- Posts: 141
- Joined: Tue May 25, 2010 3:33 pm
- Location: Fresno, Ca
- Contact:
Re: starter problems after instaling bbk
Although I have a Elite E with kick start with the 48mm bbk. Mine did have a little bit of an issue starting at first but now into my 3rd tank of fuel it seems to be fine. It dose hesitate a little still when you first fire it up in the mornings. Also make sure your cables are cleaned well it will help get the amps to the starter.
Last edited by vette66_00 on Mon Jul 19, 2010 7:21 pm, edited 2 times in total.
89 Honda Elite E 48cc bbk and gears all broken in... I get to 35 mph (gps) full out and Im 240 lbs. Need more speed

My toy.. http://www.youtube.com/watch?v=LWgZXLUy25U

My toy.. http://www.youtube.com/watch?v=LWgZXLUy25U
- Trafficjamz
- CBR1000RR

- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: starter problems after instaling bbk
speedfreek700 wrote:hello. i put my 48 bbk on my spree and its running well. my starter motor wont turn the engine over fast enough to fire it up. anyone else have this issue? i tried the starter off my other spree also, same thing. i have 125 lbs compression. i did open my starter up to have a look and cleaned it out. my battery is holding well above 11 volts while im cranking.
its an 84 with no kicker, i think i will have to add kick start. what do you guys think? thanks chris
Get a kickstart ASAP.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: starter problems after instaling bbk
Or find a place to add a second battery. Rebuilding the starter probably wouldn't hurt either.
Bear 45/70

'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- speedfreek700
- BMX

- Posts: 21
- Joined: Tue Jul 06, 2010 3:20 pm
- Location: detroit
Re: starter problems after instaling bbk
thanks for the input guys. i would like to have a kick starter. do i need to change out the front pilly for the kick star system?
- Trafficjamz
- CBR1000RR

- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: starter problems after instaling bbk
Yesspeedfreek700 wrote:thanks for the input guys. i would like to have a kick starter. do i need to change out the front pilly for the kick star system?
from an 86 or 87 spree.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: starter problems after instaling bbk
battery charge should read 12.5-13.4
some people dream of speed, i own your dreams!
Re: starter problems after instaling bbk
On what planet? A truely fully charged battery, sitting static should have better than 12.5 volts, so how will 12.5 volts charge it to full capacity? Battery charging voltage is 13.5 to 14.5 volts. Where do you get you information?maddog wrote:battery charge should read 12.5-13.4
Bear 45/70

'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- speedfreek700
- BMX

- Posts: 21
- Joined: Tue Jul 06, 2010 3:20 pm
- Location: detroit
Re: starter problems after instaling bbk
update on my starting problem. i added kickstart to get me going,after a tank of mix my electric start will now turn it fast enough to start. now im on to fooling with the carb to get her right. seems way rich with the 100 jet.
- Trafficjamz
- CBR1000RR

- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: starter problems after instaling bbk
What air filter are you using?speedfreek700 wrote:update on my starting problem. i added kickstart to get me going,after a tank of mix my electric start will now turn it fast enough to start. now im on to fooling with the carb to get her right. seems way rich with the 100 jet.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: starter problems after instaling bbk
put a pod filter on it, and take the stock box off if you want to continue using the 100 main jet. i can get you a new k&n filter for 20$ shipped in a chrome color. let me know!
if you want to use just the stock box, rejet to a 95 see how that goes. do plug chops along the way too!
if you want to use just the stock box, rejet to a 95 see how that goes. do plug chops along the way too!