Hey guys,
I recently drilled some holes in my airbox and swapped the stock jet with an "85" jet. I am running the stock piston size. Anyone foresee any issues with doing this? I'm going to do some plug chops later on it and see how it looks, but I just want to make sure I'm not going to seize up my enigine!
Thanks
Spree Up-Jet
Moderator: Moderator
-
IMiteBeWrong
- Noob
- Posts: 13
- Joined: Wed Feb 03, 2010 4:50 pm
Spree Up-Jet
86' green/white Spree NQ50
85' red Spree NQ50
85' red Spree NQ50
-
vette66_00
- Spree
- Posts: 141
- Joined: Tue May 25, 2010 3:33 pm
- Location: Fresno, Ca
- Contact:
Re: Spree Up-Jet
Plug chops are going to tell you everything, more so than anybody here will be able to. The jet and airbox mod sounds about right.
89 Honda Elite E 48cc bbk and gears all broken in... I get to 35 mph (gps) full out and Im 240 lbs. Need more speed
My toy.. http://www.youtube.com/watch?v=LWgZXLUy25U
My toy.. http://www.youtube.com/watch?v=LWgZXLUy25U
-
bradthreee
- Board Supporter
- Posts: 1922
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Spree Up-Jet
Why wait till later for the plug chops?
Go on a nice long ride to make sure you are fully warmed up. Go WOT(wide open throttle) until it reaches top speed, then hit the kill switch. Pull over and check the plug.
Go on a nice long ride to make sure you are fully warmed up. Go WOT(wide open throttle) until it reaches top speed, then hit the kill switch. Pull over and check the plug.
-
fightingplankton
- CB900F
- Posts: 1079
- Joined: Wed Oct 28, 2009 8:57 pm
- Location: Yakima, Wa
Re: Spree Up-Jet
take a socket w/ u to get it off...bradthreee wrote:Why wait till later for the plug chops?
Go on a nice long ride to make sure you are fully warmed up. Go WOT(wide open throttle) until it reaches top speed, then hit the kill switch. Pull over and check the plug.
'86 spree
'86 aero50
'83 aero80
'86 aero50
'83 aero80