bore kite on the dio

diomike · Post by **diomike** » Sat Jan 07, 2006 6:13 pm

i have a 1997 dio sr [modle [sk50]. i want to put a 70cc bore kit on it would i need a need carb or jet?
if not wats the highest i can go with a stoke crab?

hrnytrtlsgsxr · Post by **hrnytrtlsgsxr** » Sat Jan 07, 2006 7:45 pm

diomike wrote:i have a 1997 dio sr [modle [sk50]. i want to put a 70cc bore kit on it would i need a need carb or jet?
if not wats the highest i can go with a stoke crab?

you can just rejet the carb you have on now. I believe it is 100. But i would check if the kit you have already comes with a jet in it for the stock carb. if not you can checkhttp://www.vtcycles.com. J

diomike · Post by **diomike** » Sat Jan 07, 2006 9:31 pm

thnx man...
would u recomend a new pipe

hrnytrtlsgsxr · Post by **hrnytrtlsgsxr** » Sat Jan 07, 2006 9:39 pm

diomike wrote:thnx man...
would u recomend a new pipe

yes i would, another site you can visit ishttp://www.cycleimportshawaii.com.But for the best 68cc to 72cc pipe you can get is an arrow pipe. it's about $300 though. A PG long would suffice which is about $135+ shipping at VT cycles.

85stroka · Post by **85stroka** » Sat Jan 07, 2006 10:02 pm

Put a polini corsa or malossi alum.

darat · Post by **darat** » Sat Jan 07, 2006 11:03 pm

Will a dio full circle crank fit my 87 elite?

diomike · Post by **diomike** » Sun Jan 08, 2006 12:28 am

i can get an aluminum bore kit or a regulaure stell off ebay both are same prise 175$. not sure wat to do.

85stroka · Post by **85stroka** » Sun Jan 08, 2006 12:34 am

post the link, I think the ones off ebay are so so,I know they sell polini contesa's but you want a corsa if you go polini.

85stroka · Post by **85stroka** » Sun Jan 08, 2006 12:36 am

http://cgi.ebay.com/ebaymotors/POLINI-7 ... 5856QQrdZ1
the first one's a rip off
http://cgi.ebay.com/POLINI-70cc-BIG-BOR ... dZViewItem

diomike · Post by **diomike** » Sun Jan 08, 2006 12:37 am

the corsa is 225$ amarican and i would get free shiping..
i live in montreal canada

diomike · Post by **diomike** » Sun Jan 08, 2006 12:40 am

it is a straight bolt up right .

85stroka · Post by **85stroka** » Sun Jan 08, 2006 12:41 am

I think they go for 200 here?

diomike · Post by **diomike** » Sun Jan 08, 2006 12:46 am

is the last link as goood as the corta. iam trying to get a good deal so i can do all the s*** i want to my dio.

hrnytrtlsgsxr · Post by **hrnytrtlsgsxr** » Sun Jan 08, 2006 1:15 am

diomike wrote:is the last link as goood as the corta. iam trying to get a good deal so i can do all the s... i want to my dio.

no it's not. the only thing IMO thhat was better was a malossi single ring which they don't make anymore. or you could try a fabrizzi aluminum. Either way it will cost you some money. Corsas would be the best bet espacially if you just want to bolt up and go.

85stroka · Post by **85stroka** » Sun Jan 08, 2006 3:09 pm

[quote="hrnytrtlsgsxr"][quote="diomike"]is the last link as goood as the corta. iam trying to get a good deal so i can do all the s... i want to my dio.[/quote]no it's not. the only thing IMO thhat was better was a malossi single ring which they don't make anymore. or you could try a fabrizzi aluminum. Either way it will cost you some money. Corsas would be the best bet espacially if you just want to bolt up and go.[/quote]
Indeed

Honda Spree and Elite 50 Forums

bore kite on the dio

bore kite on the dio

Re: bore kite on the dio