bogging down under load
Moderator: Moderator
bogging down under load
Just bought this spree and I love it! After work today though, my nephew knocked it over and now it won't start. I don't know if its coincidence or if that's what did it, but either way it won't start. I took the plug out, and it's sparked once, but not again. Anything commonly go bad on these things after they tip?
Last edited by shane_lxi on Tue Aug 10, 2010 12:32 am, edited 1 time in total.
'86 spree; '87 cressida; '89 240sx
Re: spree fell over, wont start
Check to see if the connections to the ignition coil came loose when it fell over.
PS3 it only does everything.
Re: spree fell over, wont start
Check all the electrical connectors in the ignition system. The stator, pulse generator, CDI and the coil. Also make sure the "stop/run" switch is in the run position.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: spree fell over, wont start
Replaced the spark plug and it fired right off this morning. I think my nephew was messing with the throttle and may have flooded it. Spark plug looked burnt out anyway. Thanks for the replies! Ill make a build thread soon 
'86 spree; '87 cressida; '89 240sx
Re: spree fell over, wont start
Check all ur wire connection n it mite be a ground wire that came loose