Taiwan Exhausts / Mufflers to Ponder Over

[detonatortuning]

so, sum-azn-kid says the scorpion is real loud, i've found pipe sound levels to be very subject myself, any one have a vid with this pipe in use ?

wheelman-111 how loud is that "hot surface" pipe ? is that or something VERY similar to it readily available ?

i'm looking for a pipe that will heavily boost the off idle to 8-9k rpm range.

thanks,
steve

[Wheelman-111]

Greetings:

The Hot Surface pipe is a bit louder than stock, comparable to the intake noise of an open Pod. Much quieter than the PG and the Chamber pipes with muffler add-ons I've owned. Taz sold me mine, might have more. It's very good on the low end, seems to rev out to about 8-9K.

[nacree]

Taz what say you? Can you give us some more details on this pipe?

Thanks,

Nathan

[Epschoenly]

Would be interested in more info on buying one of these hot surfaces jawns.

[detonatortuning]

yes, seems to be a common interest, though Taz seems to be keeping quite about the whole thing. too bad, i'd be in for sure.

steve

[Munstah666]

If you're building a BB non stroker, I would use #2, V8 copy. But if you want the best, Scorpion is second to none if tuned right and not as loud.

[eliteguy50]

If you're building a BB non stroker, I would use #2, V8 copy. But if you want the best, Scorpion is second to none if tuned right and not as loud.

Why a v8 copy? Why not just get an actual v8?

[Munstah666]

If you're building a BB non stroker, I would use #2, V8 copy. But if you want the best, Scorpion is second to none if tuned right and not as loud.

Why a v8 copy? Why not just get an actual v8?

I was merely referring to which ones in HIS LIST (pg 1) I would use, but if you ask me LOOK at the second part of my qoute. ^^^

[eliteguy50]

... I was merely referring to which ones in HIS LIST (pg 1) I would use...

Oh, I wasn't sure if one had better welds or metal or what.