1986 Honda Elite 150D not moving

[Old Dad]

OK, so I have encountered another problem. My Elite 150 will start, but when I give it gas, it will not move. I am hearing something move down there but the wheels will not move. The belt is still in tact. I have taken the cover off and am looing at the pulleys. I just am not sure what else to check or how to do it. Any help would be welcome. Thanks in advance

[axo]

take a look at this:

http://www.bikebandit.com/houseofmotorc ... 20sch43682

Check the face drive (N1) and see if there are teeth engaging in the shaft, and check that the nut (N 9) is holding everything properly.. the variator should be all the way in so it will engage with the shaft, otherwise it is slipping and that's why you hear the engine reeving and the belt not moving.

[Old Dad]

It seems that the drive face is fine. The noise seems to be coming from the clutch.

[axo]

are you able to turn the clutch bell with your hand?
Try that on the stand with the engine off and the rear wheel should turn slowly as you turn the clutch bell, otherwise you got something stuck or broken in your final drive.

[Old Dad]

Yes, the clutch bell moves the wheel. And when I turned the scooter on yesterday and gave gas, the wheel turned... i am confused because just 2 days ago it would not move.

[Bear45-70]

Oh, oh another magic fix. I hate those because you never know what was wrong.

[axo]

May be you just had a really bad dream and that was all.