Help please. 1986 Honda Spree Nq50

[CamTastic]

I'm trying to find out what piston rings i need for a Oem Motor on a 1986 Honda spree nq50
I see these on a site i don't know witch one to get
02 RING SET, PISTON
13011-GAB-305 001 $25.62 $19.30
02 RING SET, PISTON
13011-GAB-305 (replaces 13011-GJ5-305) 001 $25.62 $19.30
02 RING SET (OS) (0.25)
13012-GJ5-305 (1) $25.62 $19.30
02 RING SET (OS) (0.50)
13013-GJ5-305

Please let me know.

[fastplastic]

go to babbits.com google it you can find the parts manuals and should narrow down ur search

[CamTastic]

I tryed Babbits i don't know what one to click on for my scoot im new to all this crap. hah

i just need to know what piston rings i need to use from my above post.

[martynkim]

This is what you need. 02 RING SET, PISTON
13011-GAB-305 (replaces 13011-GJ5-305) 001 $16.91

This is from my local dealers website looks like OEM is cheaper too!

[CamTastic]

Thanks Helps a lot.

[CamTastic]

Also would you give me what Gasket kit i would need for the full engine? Vin # Starts Jh2af060. Nq50 1986
Would be of great help. thanks

[eliteguy50]

Do not order rings or a piston until you pull your engine apart to spec it. It may have been bored out, don't trust the miles. I pulled apart an Aero to install a BBK at 327 miles and found a 25 over piston in it.

[CamTastic]

This one is stock. It's never been messsed with.

[eliteguy50]

This one is stock. It's never been messsed with.

Technically, it should still be spec'd for cylinder wall wear. There is a tolerance in the manual and if outside that range, it should be bored over.

[CamTastic]

This one is stock. It's never been messsed with.

Technically, it should still be spec'd for cylinder wall wear. There is a tolerance in the manual and if outside that range, it should be bored over.

Well the inside wall is spotless no wear inside its shiny and perty =)

[eliteguy50]

This one is stock. It's never been messsed with.

Technically, it should still be spec'd for cylinder wall wear. There is a tolerance in the manual and if outside that range, it should be bored over.

Well the inside wall is spotless no wear inside its shiny and perty =)

That is good. I didn't mean to make it sound like I was attacking you, just wanted to have it posted so if some newb actually uses the search function and reads this thread, they know all the details.

BTW, you will not find a cam in your spree motor. Welcome to hondaspree.net

[CamTastic]

BTW, you will not find a cam in your spree motor. Welcome to hondaspree.net

Haha thanks.