Throttle needlde e-clip
Moderator: Moderator
Throttle needlde e-clip
anyone know what size the the clip (e-clip) holding the throttle needle is?
-
Wheelman-111
- Moderator
- Posts: 10683
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Throttle needlde e-clip
Greetings:
For which carb?
It's a good question, and the grooves in the needle are awfully skinny to measure - can't get a Mic in there.
Carb makers sell the clips for whichever model of carb it is. There may or may not be a hardware store generic to fit.
For which carb?
It's a good question, and the grooves in the needle are awfully skinny to measure - can't get a Mic in there.
Carb makers sell the clips for whichever model of carb it is. There may or may not be a hardware store generic to fit.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
mousewheels
- Veteran OG
- Posts: 3487
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Throttle needlde e-clip
I'd buy an OEM needle clip. But here's a way to get a rough estimate - Scale is 0.01" per division
- Carb_Needle_Clip.jpg (112.45 KiB) Viewed 2008 times
- Carb_Needle_Clip_2.jpg (789.05 KiB) Viewed 2008 times