Rebuilding a Bystarter

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2377
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: Rebuilding a Bystarter

Post by martynkim »

Bear45-70 wrote:
josh700 wrote:Not to be a thread stealer, but after reading your post I decided to loosen mine, pull it out a bit and see what happens. And now the bike will run much longer and I can actually adjust the idle to the proper speed. However after about 5 minutes it gets nice and warm she shuts down again. Where you having this trouble also?
Sounds like your idle circuit is plugged.

EXACTLY
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Top
josh700
Noob
Noob
Posts: 7
Joined: Tue Apr 19, 2011 2:05 am
Location: Forks, Washington

Re: Rebuilding a Bystarter

Post by josh700 »

Thanks fellas
Top
RunAckRun
Noob
Noob
Posts: 13
Joined: Mon May 02, 2011 7:55 pm
Location: KY

Re: Rebuilding a Bystarter

Post by RunAckRun »

I am glad my problem may have help solve another.
Top
Post Reply

Return to “Technical Help”