Carb cleaning fun

jbarb · Post by **jbarb** » Fri Mar 10, 2006 2:18 am

Well its snowing here so I decided to tear into the carb a little. I have everything dissasembled and soaking overnight in carb cleaner.

I unscrewed the (main?) jet, the one that sticks down into the float bowl with the slotted screw. I got that peice out and the jet popped out and Im wondering if it has to go back in a certain way. It is a needle like peice with 3 tiny holes in 2 of the sides and 2 holes on the other side. Does that need to go back in a certain way or do I just stick it back in and put the slotted screw peice back in?

darat · Post by **darat** » Fri Mar 10, 2006 9:29 am

lol u got snow.. as for the peice that came out the more bigger part goes toward teh bottom and the more skinner end goes to the top of the carb..

jbarb · Post by **jbarb** » Fri Mar 10, 2006 11:20 am

Yes, it snowed, 3 days after I finally get a scooter.

I know which way it slides back in, Im wondering if the holes in the side of the needle have to point a certain way.

This peice:

[img=http://img130.imageshack.us/img130/6465 ... 4ob.th.jpg]

MySpree · Post by **MySpree** » Fri Mar 10, 2006 3:44 pm

the londer thing goes up. just like the pik is

jbarb · Post by **jbarb** » Fri Mar 10, 2006 3:56 pm

So it doesnt matter which way the peice is rotated? Just push it in there and put the screw back in?

MySpree · Post by **MySpree** » Fri Mar 10, 2006 3:58 pm

yea, just puch it in...