Checkin in, first post... here at least

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

eliteguy50
CBR1000RR
CBR1000RR
Posts: 3675
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: Checkin in, first post... here at least

Post by eliteguy50 »

Trafficjamz wrote:
eliteguy50 wrote:
fastplastic wrote:umm there is a big difference.....
Such as?
Oh yes there is a huge difference :smile:

That is the reason I want to find one of these 13 section pipes :wink:

It took Fastplastics ride from mild to wild when paired with a 28mm carb :shock:

At first glance these two pipes seem to be the same, but if you bring out the tape measure, you will see the are indeed different.
Is your 13 section with the solid mount the same as the Yosh then? The Yosh is better than the YMS V8.
motormike wrote:Errands become adventures.
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

eliteguy50 wrote: Is your 13 section with the solid mount the same as the Yosh then? The Yosh is better than the YMS V8.
Yes exactly like the yosh, but with a solid mount. sections start up the head pipe sooner and grow to an overall larger diameter before the cone piece.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Did you see my PM about that 2nd part # for the crank gasket? I could only find the first on bike bandit but the 2nd is ...? :crazy:
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

Chicago Ben wrote:Did you see my PM about that 2nd part # for the crank gasket? I could only find the first on bike bandit but the 2nd is ...? :crazy:

I gave you the honda part # :confused: try babbits? or call your nearest honda dealer.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

you sure you typed that 2nd part # correct... I cannot find it on any parts website
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

here ya go


91201-GK8-003 OIL SEAL (15.6X23.5X7) (crank seal)
91202-GAH-721 OIL SEAL (19.4X31X7) (crank seal)
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Trafficjamz wrote:here ya go


91201-GK8-003 OIL SEAL (15.6X23.5X7) (crank seal)
91202-GAH-721 OIL SEAL (19.4X31X7) (crank seal)
ordered off bikebandit , shipping to your front door
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Took a comparison shot if anyone was curious to see the Daytona shock next to the stocker. As you can see it is slightly longer.

Image
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
KingJeff801
Board Supporter
Board Supporter
Posts: 584
Joined: Mon Jun 14, 2010 9:16 pm
Location: S.L.UT

Re: Checkin in, first post... here at least

Post by KingJeff801 »

Nice shock. It must have costed a pretty penny being a daytona.
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe

Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video

Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051

Wrong Side Kings 4 Life
User avatar
toad772
Elite
Elite
Posts: 384
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Checkin in, first post... here at least

Post by toad772 »

Chicago Ben wrote:
Trafficjamz wrote:here ya go


91201-GK8-003 OIL SEAL (15.6X23.5X7) (crank seal)
91202-GAH-721 OIL SEAL (19.4X31X7) (crank seal)
ordered off bikebandit , shipping to your front door
Honda dealer is cheaper bikebandit shipping is nuts(to canada anyway)
Image
PS3 it only does everything.
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

KingJeff801 wrote:Nice shock. It must have costed a pretty penny being a daytona.
Actually I have been waiting for months for the color scheme to get back in stock at bowlsla.com. They carry them for $85. Not too bad since most even on ebay are that much...
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

toad772 wrote:
Chicago Ben wrote:
Trafficjamz wrote:here ya go


91201-GK8-003 OIL SEAL (15.6X23.5X7) (crank seal)
91202-GAH-721 OIL SEAL (19.4X31X7) (crank seal)
ordered off bikebandit , shipping to your front door
Honda dealer is cheaper bikebandit shipping is nuts(to canada anyway)
I hear that, just when you live in downtown Chicago there aren't too many Honda motorcycle dealers close by...
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
Chicago Ben
Elite
Elite
Posts: 432
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Parts keep rolling in...

I have a used Met wheel on its way and a 90/90-10 Pirelli SL 26 tubeless to put on it

The money pit!
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9242
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Checkin in, first post... here at least

Post by Bear45-70 »

Chicago Ben wrote:I hear that, just when you live in downtown Chicago there aren't too many Honda motorcycle dealers close by...
Try 42 miles to the nearest Honda dealer and the next is 48 miles. I don't think your distance is an issue.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
motormike
Moderator
Moderator
Posts: 4815
Joined: Wed Dec 29, 2010 10:58 pm
Location: Glasgow, KY

Re: Checkin in, first post... here at least

Post by motormike »

Chicago Ben wrote:
I have a used Met wheel on its way and a 90/90-10 Pirelli SL 26 tubeless to put on it
Those Pirelli SL 26's are excellent tire for the money......also Shinko has been performing top-notch on the front of my Gyro track bike considering they cost about $22 a piece......the guys I race with swear that Dunlop tt92's are the sh**.....they cost BIG $$......I'm not a fan of Cheng Shin or Kenda.......... :imo:
RideRed
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
Post Reply