Sprelite The Begining Of My Epic Build

SpreeMadness520 · Post by **SpreeMadness520** » Sat May 28, 2011 1:17 pm

I like the fact of the bigger tire, I do some dirt roading here in hart and dont like the skinny tire.

SpreeMadness520 · Post by **SpreeMadness520** » Wed Jun 01, 2011 7:43 pm

Is the 50mm bore going to overheat quickly? Anyone have expirence with a 50mm bore?

Trafficjamz · Post by **Trafficjamz** » Wed Jun 01, 2011 7:57 pm

If it is jetted correctly, and the compression is not too high, it should be fine.

SpreeMadness520 · Post by **SpreeMadness520** » Wed Jun 01, 2011 7:58 pm

Ok, Thats all if I can keep the front tire on the ground

Trafficjamz · Post by **Trafficjamz** » Wed Jun 01, 2011 9:56 pm

SpreeMadness520 wrote:Ok, Thats all if I can keep the front tire on the ground

8:1 , 7.5 or taller

6.9 primary gears maybe ?:twisted: Top speed would be insane on that spree.

SpreeMadness520 · Post by **SpreeMadness520** » Thu Jun 02, 2011 7:27 am

Would I get good acceleration?

fastplastic · Post by **fastplastic** » Thu Jun 02, 2011 7:30 am

SpreeMadness520 wrote:Would I get good acceleration?

duh you weight like 5lbs

SpreeMadness520 · Post by **SpreeMadness520** » Thu Jun 02, 2011 7:33 am

Lmao

Trafficjamz · Post by **Trafficjamz** » Thu Jun 02, 2011 11:44 am

SpreeMadness520 wrote:Would I get good acceleration?

The srx was 6.9 gears and a 72cc

SpreeMadness520 · Post by **SpreeMadness520** » Fri Jun 03, 2011 8:14 pm

T-jamz, What would be the best pipe (your opinion) for the 50mm bore? I like the look of the expansion chanber pipe but the pg's are cool to. I dont care about how loud it is, If im going to get pulled over im doing it in style...

Trafficjamz · Post by **Trafficjamz** » Fri Jun 03, 2011 9:34 pm

SpreeMadness520 wrote:T-jamz, What would be the best pipe (your opinion) for the 50mm bore? I like the look of the expansion chanber pipe but the pg's are cool to. I dont care about how loud it is, If im going to get pulled over im doing it in style...

The YMS V8 pipe seemed to work pretty good and is not too loud,and lots of low end power.

I have never tried the pg long on my 50mm bore.

The expansion chamber pipe revs a bit higher but always resulted in hotter running temps, no matter how hight I jetted it.

SpreeMadness520 · Post by **SpreeMadness520** » Fri Jun 03, 2011 9:40 pm

I dont want it to run hot, So maybe v8 or pg long. Ill do some research. Oh ive forgot to mention there is a red elite/dio in manistee we saw on the way to your shop. I figured you know who it was...

Trafficjamz · Post by **Trafficjamz** » Fri Jun 03, 2011 9:46 pm

SpreeMadness520 wrote:I dont want it to run hot, So maybe v8 or pg long. Ill do some research. Oh ive forgot to mention there is a red elite/dio in manistee we saw on the way to your shop. I figured you know who it was...

That was redspree on this forum. That is a polini corsa with 7.5: gears. It is a very nice cruzer

SpreeMadness520 · Post by **SpreeMadness520** » Fri Jun 03, 2011 9:57 pm

Yeah with a pg long, He didnt seem too old lol

KingJeff801 · Post by **KingJeff801** » Fri Jun 03, 2011 10:25 pm

SpreeMadness520 wrote:Yeah with a pg long, He didnt seem too old lol

He got that PG long form a very cool dude !

Honda Spree and Elite 50 Forums

Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build